PCAN-Router Pro FD – User Manual
49
7.4.4
Memory Card Capacity and Logging Duration
The amount of data generated during a recording is determined by
the bit rates used, the bus load, and the length of the CAN
messages.
Example:
All 6 CAN channels are operated with a nominal bit rate of
500 kByte/s and a data bit rate of 2 MByte/s. The incoming message
traffic generates 50 % bus load.
With a 32 GByte memory card the data traffic of all 6 CAN channels
can be recorded for at least 11 hours.
7.4.5
FTP Data Transfer
Since version 1.1.0.11 the data logger firmware supports the PCAN-
Router Pro FD with Ethernet interface (IPEH-002222). The firmware
includes a basic FTP server implementation for transferring data via
Ethernet. This can be used to download trace files from the memory
cards or to upload a new configuration file.
Do the following to etablish a FTP connection:
1.
Meet the following requirements:
•
Data logger configuration file with valid IP settings and
FTP_ACCESS set to YES.
•
PCAN-Router Pro FD is powered and connected to the
IP network via Ethernet.
•
Tracing is stopped.
•
Your FTP software is limited to a single FTP connection.
•
There are no other FTP connections from other
computers.
2.
Start your software for connecting via FTP.