PCAN-Router Pro FD – User Manual
56
3.
Enter the IP address of your PCAN-Router Pro FD which you
have set in the
config.txt
or has been assigned via DHCP.
4.
Click on “Connect”.
The connection is established, the control elements are
enabled and a message is added to the message log.
5.
You can now use the control elements to transmit command
requests.
6.
Use “Disconnect” to close the connection.
As long as the PCAN-Router Pro FD is running, the connection is
active. The connection is closed automatically if the device is
disconnected or switched off. This can be used to monitor the
“alive” status of the PCAN-Router Pro FD.
Note:
The website cannot be opened from the
PCAN-Router Pro FD via Ethernet. No HTTP server functionality
is implemented within the data logger firmware.
