manualshive.com logo in svg

Peak IPEH-002220, Руководство пользователя

Поделиться
Скачать
Peak IPEH-002220 Скачать руководство пользователя страница 22

PCAN-Router Pro FD – User Manual 
 

22 

Attention!

 Electrostatic discharge (ESD) can damage or destroy 

components on the card. Take precautions to avoid ESD. 

Do the following to install the backup battery: 

1.

 

Disconnect the device from the power supply. 

2.

 

Remove the eight screws at the front and rear of the 
housing. 

3.

 

Remove the back panel and housing cover. 

4.

 

Pull the board out of the housing in the direction of the front 
side. 

5.

 

Insert the backup battery with integrated protection (form 
factor 18650) according to the polarity. 

6.

 

Fasten the battery with a cable tie in the recesses provided. 

7.

 

Push the board back into the first rail of the housing. 

8.

 

Put the housing cover and back panel back in place. 

9.

 

Fasten all screws to the front and rear of the housing. 

Important note:

 Only use batteries with integrated PCB 

protection to avoid short circuit, overcharging, and deep 
discharge! We recommend using a lithium-ion battery such as 
the Soshine 18650 3600 mAh 3.7 V or comparable models. 

Содержание IPEH-002220

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды