background image

PCAN-Router Pro FD – User Manual 
 

42 

Parameter 

Value Range 

CAN ID 

Extended 29-bit CAN ID specified in hexadecimal format with 
a value larger than 7FF. 

First Data Byte 

1 = Tracing is started. 
2 = Tracing is stopped. 

 

Note:

 The specified CAN ID must not be used on any connected 

CAN bus. By default, this feature is commented out to prevent 
unintended behavior. 

7.3

 

Configuration of the Ethernet 
Connection 

Since version 1.1.0.11 the data logger firmware supports the PCAN-
Router Pro FD with Ethernet interface (IPEH-002222). For the 
configuration of the interface and its usage the 

config.txt

 has 

been extended. The additional settings are described in the 
following subchapters. 

Note:

 When using a regular PCAN-Router Pro FD without 

Ethernet, the additional settings are ignored. 

7.3.1

 

IP Address 

This setting controls the activation of the Ethernet interface and the 
assignment of the IP address. When assigning addresses in an IP 
network, the IP address can be assigned automatically by a DHCP 
server or manually. 

ETH_IP=DHCP

 

 

Option 

Description 

 

No value. Disables the Ethernet interface.

 

Содержание IPEH-002220

































































Отзывы: