Parker H Series, Инструкция по установке и обслуживанию

Страница: 9 / 344

H Series Fieldbus 32 Point Valve Driver, Series A (PSSV32A) E100P
8
32 Point Valve Driver
Outputs per Module
32, sourcing
Voltage Drop, On-State Output, Maximum 0.2VDC
Voltage, Off-State Output, Maximum 28.8VDC
Voltage, On-State Output,
Maximum
28.8VDC
Minimum 10VDC
Nominal 24VDC
Output Current Rating 200 mA per channel, not to exceed 6.0 A per module
Output Surge Current, Maximum 0.5 A for 10 ms, repeatable every 3 seconds
Current Leakage, Off-State Output, Maximum 0.1 mA
Current, On-State Output Minimum 200 mA per channel
Output Delay Time OFF to ON, Maximum 1 0.1 ms
Output Delay Time, ON to OFF, Maximum
1
0.1 ms
External DC Power Supply Voltage Range 10 to 28.8VDC
External DC Power Supply Voltage Nominal 24VDC
General Specifications
LED Indicators 1 output status
1 green/red network status, logic side
1 green/red module status, logic side
PointBus Current, Maximum 75 mA @ 5VDC
Operating Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20 to 60°C (-4 to 140°F)
Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
-40 to 85°C (-40 to 185°F)
Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):
5 to 95% non-condensing
Shock IEC60068-2-27 (Test Ea, Unpackaged Shock):
Operating 30g
Non-operating 50g
Vibration IEC60068-2-6 (Test Fc, Operating):
5g @ 10 to 500Hz
ESD Immunity IEC 61000-4-2:
6kV contact discharges
8kV air discharges
Radiated RF Immunity IEC 61000-4-3:
10V/m with 1kHz sine-wave 80%AM from 30MHz to 2000MHz
10V/m with 200Hz 50% Pulse 100%AM at 900Mhz
10V/m with 200Hz 50% Pulse 100%AM at 1890Mhz
EFT/B Immunity IEC 61000-4-4:
±3kV at 5kHz on signal ports
Surge Transient Immunity IEC 61000-4-5:
±1kV line-line(DM) and ±2kV line-earth(CM) on signal ports
Conducted RF Immunity IEC 61000-4-6:
10Vrms with 1kHz sine-wave 80%AM from 150kHz to 80MHz
Emissions CSPR 11:
Group 1, Class A
Enclosure Type Rating Meets IP65/66/67 (when marked)
Mounting Base Screw Torque #8 screw, 7.5 in. lbs. in Aluminum, 16 in. lbs. in Steel
Wiring Category 2 1 - on signal ports
Certifications: c-UL-us UL Listed Industrial Control Equipment,
(when product is marked) certified for US and Canada
CE European Union 89/336/EEC EMC Directive,
compliant with:
EN 61000-6-4; Industrial Emissions
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
C- Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
1. OFF to ON or ON to OFF delay is time from a valid output “on” or “off” signal to output energization or de-energization.
2. Use this Conductor Category information for planning conductor routing. Refer to Publication E115P, “Industrial Automation Wiring and Grounding Guidelines”.
Specifications
–
Following are specifications for the 32 point valve driver.