SMARTZONE UPS INSTALLATION MANUAL
41
Figure 59: Manually Rotate the Display on the 1-3kVA UPS Units
c. Reinstall the faceplate on the UPS, by aligning the front panel display through
the hole in the faceplate and snapping the faceplate onto the front of the UPS.
Should have a positive snap of the latches on the faceplate (see figure below).
Figure 60: Example of Snapping the Faceplate onto the Front of the UPS
d. Install the faceplate on the EBP, by aligning the front panel latches with the
holes in the front of the unit and snapping the faceplate onto the front of the
EBP. Should have a positive snap of the latches on the faceplate.
4. Connect the internal battery cartridges:
