SMARTZONE UPS INSTALLATION MANUAL
19
c. Insert the connectors back into the middle hole on the chassis.
d. Reinstall and secure the retained battery covers in reverse order of above
step.
e. Reinstall the faceplate on the EBP, by aligning the front panel latches with the
holes in the front of the unit and snapping the faceplate onto the front of the
EBP unit. Should have a positive snap of the latches on the faceplate.
4. Install the mounting brackets:
a. Remove the 2x Phillips Flat Head M4x8 screws from the front of each side the
EBP and retain.
b. Align the mounting brackets with the screw holes on each side of the EBP and
secure with the previously removed Phillips Flat Head M4×8 screws (see
figure below).
Figure 16: Install the Mounting Bracket
5. Install the EBP unit into the rack:
a. After installing the mounting brackets onto the EBP, slide the EBP unit into the
rack on the rail kit (see figure below).
Figure 17: Slide EBP into the Rack
