SMARTZONE UPS INSTALLATION MANUAL
17
c. install the rear side of the rail kit with 3x Phillips Pan Head M5 screws (see
figure below) on each rail.
Figure 11: Install the Rear Side of Rails
d. Tighten all 12x screws to secure the rail kit to the rack.
e. Install the 4x M5 cage nuts in the rack front equipment rail, with square holes.
One in each of the first locations below the bottom rail kit screw and one in
each of the first locations above the top rail kit screw (see figure below).
Figure 12: Install Cage Nuts in the Front Equipment Rail with Square
Holes
2. Remove the faceplate:
a. Press both sides of EBP faceplate until the latches release and remove (see
figure below).
Figure 13: Press the Latches and Remove Faceplate
