Panasonic MINAS A5-series, Руководство по эксплуатации

Страница: 28 / 394

1-16
1
Before Using
the Products
5. Installation
Driver
Install the driver properly to avoid a breakdown or an accident.
Installation Place
1) Install the driver in a control panel enclosed in noncombustible material and placed in-
door where the product is not subjected to rain or direct sunlight. The products are not
waterproof.
2) Where the products are not subjected to corrosive atmospheres such as hydrogen sul-
fide, sulfurous acid, chlorine, ammonia, sulfur, chloric gas, sulfuric gas, acid, alkaline
and salt and so on, and are free from splash of inflammable gas.
) Where the motor is free from grinding oil, oil mist, iron powder or chips.
) Well-ventilated and low humidity and dust-free place.
5) Vibration-free place.
6) Do not use benzine, thinner, alcohol, acidic cleaner and alkaline cleaner because they can
discolor or damage the exterior case.
Environmental Conditions
Item Conditions
Ambient temperature
0˚C to 55˚C (free from freezing)
Ambient humidity 20% to 85% RH (free from condensation)
Storage temperature * 1
–20˚C to 65˚C (Max.temperature guarantee: 80˚C for 72 hours)
Storage humidity 20% to 85% RH (free from condensation)
Vibration Lower than 5.88m/s 2 (0.6G), 10 to 60Hz
Altitude Lower than 1000m
* 1 Extreme temperatures are permissible only for short period such as during transportation.
How to Install
1) Rack-mount type. Install in vertical position, and reserve enough space around the
servo driver for ventilation.
2) Base mount (rear mount) is standard for A/B/C/D-frame driver.
) To change the mounting surface of A/B/C/D-frame driver, use the optional mounting
fixture. For choosing the correct optional mounting fixture, refer to P.7-90 “Mounting
Bracket”.
A to D-frame E, F-frame
Basemount (Standard)
[Rear mount]
Frontmount
[Use mounting fixture]
Front or Basemount
[Use mounting fixture]
Mounting fixture
(optional parts)
Mounting fixture
(Attachment)
Fastening torque of earth screws (M4)
to be 0.7 to 0.8 N
•
m.
Fastening torque of earth screws (M5)
to be 1.4 to 1.6 N
•
m.