Panasonic LP-M Series, Руководство по обслуживанию

Страница: 89 / 174

89
Terminal No. Name / Description
t
Data number for Rank /External offset function (SELECT 0 input: ON)
The rank/external offset function is a function that switches marking characters (rank) or the
coordinates (external offset) using the input terminal D0 to D15. Configure the character or coordinate
patterns to the data number corresponding to D0 to D15 in advance. Specify which pattern you will
mark from D0 to D15.
Specify the data number in the binary system as D0 to D15 and turn ON the set input.
The data numbers corresponding to D0 to D15 are defined as follows according to the settings.
I/O input condition settings * Terminal Data number target Data number
Rank: 4-bit × 4 D0 to D3 Rank 0 0 to 15
D4 to D7 Rank 1 0 to 15
D8 to D11 Rank 2 0 to 15
D12 to D15 Rank 3 0 to 15
Rank: 8-bit × 2 D0 to D7 Rank 0 0 to 255
D8 to D15 Rank 1 0 to 255
External offset: Lower 4 bits D0 to D3 External Offset 0 to 15
External offset: Lower 8 bits D0 to D7 External Offset 0 to 255
External offset: Lower 10 bits D0 to D9 External Offset 0 to 1023
* You can also use the rank function together with the external offset function. If you use the same
terminal for both the rank and external offset at this time, the input status will be reflected to the
data number of both functions.
Example: Specify data number 15 when using lower 8 bits
Select “0000 1111”, which represents 15 in a 8-bit binary system, by specifying ON/OFF of D0 to D7
as shown in the below table. (D0 is the lowest digit number.)
D0 to D7: Data number (the lower 8 bits are used)
Terminal Data number (binary) INPUT
D0 1 ON
D1 1 ON
D2 1 ON
D3 1 ON
D4 0 OFF
D5 0 OFF
D6 0 OFF
D7 0 OFF
19 RESERVE: System reservation
Do not connect externally.
ME-LPM-SSM-10