The computer will restart.
8.
Touch [Recovery].
9.
At the confirmation message, touch [Accept.].
10.
Confirm the contents of “EULA”, and touch [Accept] if you continue.
11.
Touch [Disk 0].
12.
Touch [Recovery ALL Partitions.].
13.
Touch [Remain Recovery Partition.].
Follow the on-screen instructions.
14.
When the Ending process screen is displayed, remove the Recovery Disc and commercially available optical drive and then touch
[Reboot].
Follow the on-screen instructions.
15.
On the “Finish Recovery Process.” screen, touch [Shutdown.].
16.
Turn on the computer.
17.
Perform Setup Windows (
OPERATING INSTRUCTIONS - Read Me First).
18.
Start the Setup Utility and change the settings as necessary.
19.
<Only for model with TPM> Clear TPM.
1.
Touch and hold
(Start) at the bottom left corner.
2.
Touch [Run], then input “tpm.msc” and touch [OK].
3.
Touch [Clear TPM] under “Actions” on the right of the “Trusted Platform Module (TPM) Management on Local Computer” screen.
4.
Touch [Restart] of the “Manage the TPM security hardware” screen.
TPM is cleared, and the computer will restart.
-
125
-
Содержание FZ-G1 Series
Страница 75: ...Diagnostic Utility Execute Diagnostic Utility 75 ...
Страница 85: ...2 Draw the card straight out 3 Close the cover 85 ...
Страница 99: ...Other Functions 99 ...
Страница 108: ...3 Open up the whole hand strap 108 ...
