Panasonic FZ-G1 Series, Инструкция по эксплуатации - Справочное руководство

Страница: 103 / 145

L. Photo storage folder
Specify the destination of recorded photo data to save. The default value is the “Pictures” folder.
M. Video storage folder
Specify the destination of recorded video data to save. The default value is the “Videos” folder.
If you specify the FAT32 formatted storage as destination to save, video files cannot be correctly created when the storage data
capacity exceeds 4 GB.
N. Save barcode file automatically
O. Barcode file storage folder <Only for model with rear camera>
Specify the destination of saved barcode text. The default value is the “Pictures/Barcode” folder.
P. Character recognition file storage folder <Only for model with rear camera>
Specify the destination of saved OCR text. The default value is the “Pictures/OCR” folder.
Q. Self-Timer
Specify the time period until shooting starts after the button is pressed. (OFF/5 sec./10 sec.)
R. Interval Shooting
When you move the slider to the right, and specify the value except [0], the camera automatically repeats shooting at intervals of spe-
cified seconds. The maximum 10 photos can be shot continuously.
S. Restore default settings
Return all the settings to the default values.
To close the “Settings” menu, touch on the upper left of the screen, or touch the preview screen.
N O T E
n
To specify the save destination folder, select the folder you have the access right to. If a writing error occurs, change the specified folder.
n
The drive that appears by performing the following procedure will be used as the location in which the “Pictures” and “Videos” folders will be
stored.
Touch (Start) - (Settings) - [System] - [Storage], and then touch [Change where new content is saved] under “More storage set-
tings”.
- 103 -