Barcode Reader (only for model with Barcode Reader)
Reading is not possible.
Confirm that the barcode is readable (without damage, etc.). Confirm that the barcode (sym-
bology) is readable. If the barcode is Codablock A or ISBN, for example, configure the code so
that it is readable using the Barcode Configuration Utility.
Confirm the area for reading. The distance from the reader to the barcode is important. As a
rule of thumb, a farther distance should be used for a larger symbol to allow the light to cover the
symbol. In addition, a closer distance should be used for a thinner symbol.
Be sure the barcode is not placed closer than necessary to the reader.
Set
to [Enabled] in the [Advanced] menu of the Setup Utility.
User Switching
Some applications do not work properly.
When switching to a different user without signing out, some applications do not work properly.
In this case, sign out the other users.
Others
Although the computer is turned on, the fol-
lowing problems occur.
The indicators do not light.
No sound.
Screen is dark.
The concealed mode is enabled (
).
No response.
Open Task Manager and close the software application.
1.
Touch and hold
(Start) at the bottom left corner, and then touch [Task Man-
ager].
An input screen (e.g., password input screen at startup) may be hidden behind another win-
dow. Touch the button on the task bar to check.
Shut down by pressing and holding the power switch
for 4 seconds or longer, and turn
on the computer and open the application again.
If Windows runs correctly, but the application software does not start, uninstall the failing applic-
ation software, then reinstall it.
To uninstall, perform the procedure below.
1.
Touch
(Start) -
(Settings) - [Apps] - [Apps & features].
2.
Select the program you want to uninstall, and touch [Uninstall].
A motion image file cannot be played using
Windows
®
Media Player and the message
“Codec required” appears.
Some motion image files require a Codec that is not installed as standard. In this case, connect to the
Internet and try playback of the file again. The Codec may automatically be downloaded so you may be
able to play it.
“Battery not exist” is displayed.
Battery goes to sleep if the battery is about 5%, may be displayed such as “Not exist” or “Not use” is not a
malfunction. Connect the AC adaptor for a while.
Checking the Computer's Usage Status
You can check the computer's usage status in the PC Information Viewer. You may need this information when calling Panasonic Technical Support for
advice.
N O T E
n
This computer periodically records the management information of the flash memory, etc. The maximum data volume for each record
-
117
-
Содержание FZ-G1 Series
Страница 75: ...Diagnostic Utility Execute Diagnostic Utility 75 ...
Страница 85: ...2 Draw the card straight out 3 Close the cover 85 ...
Страница 99: ...Other Functions 99 ...
Страница 108: ...3 Open up the whole hand strap 108 ...
