Panasonic fp2/fp2sh Скачать руководство пользователя страница 235

Страница: 235 / 374

IC Memory Card

FP2/FP2SH

−

7.5

Menus Related to Tool Software

7.5

Menus Related to Tool Software

The FPWIN GR is equipped with menus that are used for management of the IC

memory card.

Reading Programs and Data Stored on IC Memory Cards

“Upload Program from IC Card...”

This enables one program to be selected from among the multiple programs stored on

the IC memory card, and read to the FPWIN GR.

“Copy File from IC Card...”

This reads a program or data file stored on the IC memory card, and copies it to a floppy

disk (or hard disk).

When creating a copy of a file stored on the IC memory card, first copy the file stored

on the IC memory card, that serves as the source file, using this menu, and then insert

the new IC memory card and use “Copy File from IC Card...” to copy the data from the

disk to the IC memory card.

Initializing the IC Memory Card

“Erase IC Card...”

This clears all of the contents from the IC memory card. The program field assured with

the “Format IC Card...” function is cleared, and the entire card is used as an expanded

memory field.

Management of an SRAM type of IC Memory Card

Before using the card
“Format IC Card...”

The IC memory card is formatted, and a “program memory field” is assured in which pro-

grams can be saved. The remaining area assured as the “program memory field” then

serves as an expanded memory area.

Writing data to the IC memory card
“Download Program to IC Card...”

Programs are written from the FPWIN GR to the IC memory card.

“Copy File to IC Card...”

The contents of a floppy disk (or hard disk) are copied to the IC memory card. This func-

tion can also be used to select multiple programs and write them to the IC memory card

as a batch, all at once.

Содержание fp2/fp2sh























































































































































































































































































































































































Результаты поиска

Содержание fp2/fp2sh

Отзывы:

Похожие инструкции для fp2/fp2sh

Бренды по названию

Популярные бренды

Panasonic fp2/fp2sh, Руководство пользователя

Результаты поиска

Содержание fp2/fp2sh

Отзывы:

Похожие инструкции для fp2/fp2sh

Бренды по названию

Популярные бренды