Panasonic CZ-256ESMC3, Руководство по эксплуатации

Страница: 21 / 230

21
Preparations before changing settings
Preparation
Initial settings
Step Category step Setting Screen menu names
Reference
page
Operation
Air
conditioning
operations
only
Distribution rate
display only
Quantity used,
charges display
Time Load Time Load
9 Network related*
12
IP address, net mask,
DHCP, etc.
Network settings
123
    
Setting to send alarm mails Email settings 168
    
User ID, password,
privileges
Web user settings
125
    
10
Intelligent
controller related
Buzzer volume Display/Volume settings 199
    
Brightness of the back light Display/Volume settings 199
    
Auto logout time Display/Volume settings 199
    
Register PIN (Identification
number)
Initialize
202
    
Initialise the days
accumulated data*
13
Initialize
202
    
*1 Attention needs to be paid to administration divisions when devices such as systems controllers are to be used in conjunction with this unit.
*2 Settings required when area administration is to be performed.
*3 Select the object of calculations for electricity distributing from the following:
Operating hours Select when consideration is to be paid to the electricity for the indoor units. The electricity for outdoor units and indoor units are both
loaded into this unit and distributed.
Thermostat on times Select when no consideration is to be paid to the electricity for the indoor units. The electricity for outdoor units only is loaded into this
unit and distributed.
*4 If the air conditioning units included in the system are multi-function types supporting simultaneous heating and cooling or ice thermal storage models, settings
are required.
*5 Settings are required only when units are GHP with generators.
*6 Settings are required when only the accumulation operating time is to be managed.
*7 This must be set if you want to display charges.
*8 This only needs to be set for interface adaptors. (→“Interface adaptors (sold separately)” (P.224))
*9 This is used when calculating load distributing.
*10 Set items such as batch startup and stopping from external input.
*11 Set items such as batch alarm output to external devices.
*12 Required when logging in through a network device to operate and monitor.
*13 Clears the data calculated from test operation of the air conditioning units before hand over.