Panasonic AJ-HPD2500P Скачать руководство пользователя

Страница: 220 / 236

220

For Long and Trouble-Free Operation: Error Messages

Playlist

CANNOT OPERATE:

A.DUB EVENT

INCLUDED

Since the selected events include an A.DUB

event, operation is not possible.

Remove the A.DUB event from the selection.

CANNOT OPERATE:

BLANK EVENT

INCLUDED

Since the selected events include a blank event,

operation is not possible.

Remove the blank event from the selection.

CANNOT OPERATE:

BLANK VIDEO

EVENT INCLUDED

Since the selected events include a blank video

event, operation is not possible.

Remove the blank video event from the selection.

CANNOT OPERATE:

COLLAPSE CLIP

INCLUDED

Some of the clips are abnormal.

Use normal clips only.

There may also be a bad clip at the location where

the data is copied to.

CANNOT OPERATE:

DIFFERENT ASPECT

RATIO INCLUDED

There are clips with different aspect ratios.

Aspect ratios cannot be mixed. Use only clips with

the same aspect ratio.

CANNOT OPERATE:

DIFFERENT

REFERRED

POSITION

Since the location of the clip referenced by the

event differs, operation is not possible.

Select only events whose source clips have the

same time code.

CANNOT OPERATE:

ILLEGAL EVENT

INCLUDED

There are illegal events.

Change the illegal events to the correct status.

CANNOT OPERATE:

INTERNAL MEMORY

IS FULL

Internal memory is full and no new audio level

values can be added.

Use the UNITY level to delete existing audio level or

delete the event to which an audio level was added.

CANNOT OPERATE:

INVALID AUDIO FILE

This audio file cannot be used.

A playlist with mixed 16-bit and 24-bit audio cannot

be loaded.

CANNOT OPERATE:

MULTI FORMAT

INCLUDED

The files are not in the same format.

Playlist files in different formats cannot be loaded.

CANNOT OPERATE:

MULTI SOURCE

INCLUDED IN

SELECTED EVENTS

Since the selected event references multiple

clips, operation is not possible.

Select only events that reference the same clip.

CANNOT OPERATE:

PLAYLIST FILE IS

NOT FOUND

No playlist file could be found.

Insert a card with a playlist file.

CANNOT OPERATE:

PLAYLIST IS NOT

SAVED

The playlist has not been saved.

Save the playlist.

CANNOT OPERATE:

UNMATCH INPOINT

Since there is a track with a non-matching source

IN point, operation is not possible.

Match up the IN points of all tracks.

CANNOT OPERATE:

UNMATCH INSERT

POINTS

Since there is a track with a non-matching

destination points, operation is not possible.

Match up the destination points of all tracks.

CANNOT OPERATE:

UNMATCH

OUTPOINT

Since there is a track with a non-matching source

OUT point, operation is not possible.

Match up the OUT points of all tracks.

CAPTURE

INCOMPLETED

A capture from an external player failed to

capture the entire clip, but registered what was

captured.

When OUT points are displaced due to intermittent

time codes, for example, trimming could be used to

revise.

DIFFERENT

FORMAT!

The playlist being edited and the event and clip

selected for importing are in a different playlist

format (codec or frame rate).

Use clips in a matching playlist format.

DIFFERENT

PLAYLIST VERSION!

The playlist contains files in different versions.

Playlist files in a different version cannot be

imported.

Item

Message

Description

Measure

Содержание AJ-HPD2500P













































































































































































































































Результаты поиска

Содержание AJ-HPD2500P

Отзывы:

Похожие инструкции для AJ-HPD2500P

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500P, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500P

Отзывы:

Похожие инструкции для AJ-HPD2500P

Бренды по названию

Популярные бренды