Panasonic AJ-HPD2500P Скачать руководство пользователя

Страница: 102 / 236

102

Editing: Creating Playlists

After setting the IN or OUT point, preview to check edit result

on the recorder.

Press the PREVIEW button to preview.

Start preview by pressing the PREVIEW button to play

back the edited section on the recorder starting 3 seconds

before the beginning of the edit section (PREROLL TIME

setting) to 1 second beyond the end of the section.

Events are indicated in orange during a preview.

During a preview, a temporary event (an event displayed

in orange) that indicates a temporary edit section is

created on the timeline. This is referred to as a temporary

registration. In this state, the event is not imported (not

stored on the P2 card).

Press the REC button to register an event.

This operation records the required video section on the

P2 card in the slot selected for recording. If required, use

the SLOT SELECT button to select the slot to be used for

recording prior to recording. This recording extends 2

seconds beyond the IN and OUT points to allow room for

trimming after editing.

The event is recorded and appears on the timeline.

◆

NOTE:

• To end preview, press the STOP button.

• A temporarily registered section on an external device

(RS-422A) used as the player is played back or reviewed

without video or sound. A review plays back the entire

temporarily registered section.

• To confirm the edit result without previewing it, press the REC

button.

• When an edit is started by defining only IN points of the player

and recorder, a temporary event of up to 24 hours will be

created on the recorder. Set an OUT point during the preview or

press the STOP button during capture to reset the length of the

event.

• The margin before and after a temporarily registered section

that is imported in a capture is a maximum of 2 seconds. Data

that exceeds the IN and OUT points when a hard disk is used as

the player, and data that exceeds the start and end points of

material when the player is an external device are not imported.

Also, the preroll needs a period of time equal to the set preroll

time plus 2 seconds.

• When the player is a device other than a P2 card, a preview

without defining the IN and OUT points is not possible after

finalizing the edit (after capture).

• When an external device (RS-422A) is used as the player and

the time code of the external device is intermittent, the event

may not be properly imported to the timeline even if the capture

operation works. As long as the OUT point shift is not longer than

2 seconds, it is possible to revise the event after using the

trimming function for importing.

• Audio levels cannot be set during registration or preview of

events when the player is something other than a P2 card.

• Audio channels cannot be switched during editing that uses an

external device (RS-422A) as the player.

➝

Refer to “Changing audio channel content” (page 95).

• Events cannot be selected and menu operations are not

available during temporary registration. To cancel temporary

registration, press the CANCEL (SHIFT + EXIT) button.

• When an external device (RS-422A) is used as the player, TCG

appears on the recorder screen if the SHIFT and COUNTER

buttons are pressed simultaneously.

For a live recording, be sure to set the IN point of the recorder.

Press the REC button to register an event.

Preroll is performed from the IN point and playback start.

At the IN point, the recorder pauses temporarily (about 1

Preview and assigning events (when the
player is an external device (RS-422A) or
hard disk)

Registering events (live recording)

Содержание AJ-HPD2500P













































































































































































































































Результаты поиска

Содержание AJ-HPD2500P

Отзывы:

Похожие инструкции для AJ-HPD2500P

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500P, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500P

Отзывы:

Похожие инструкции для AJ-HPD2500P

Бренды по названию

Популярные бренды