Panasonic AJ-HPD2500P Скачать руководство пользователя

Страница: 48 / 236

Introduction: Jog and Shuttle Operations Using the Search Dial

Jog and Shuttle Operations Using the Search Dial

The search dial is used to search and check video.

Each press of the dial switches it between the SHTL/SLOW mode and JOG mode.

When the power is turned on, the search dial will not operate unless it is first returned to the STILL position.

Press the search dial so that it remains pressed in.

The jog mode is now engaged.

Turn the search dial.

The dial’s click stops are released and playback is

performed at the speed the dial (–1 to +1×) is turned.

When the dial stops turning, the video becomes a still

picture.

To go to another mode from the jog mode, press the

button of the desired mode.

◆

NOTE:

• The direct search mode that allows you to go directly to the

shuttle mode or jog mode by turning the search dial is a factory

default.

• You can set setup menu No. 100 (SEARCH ENA) to KEY so that

the unit will not engage the search mode unless you press the

SEARCH button.

Press the search dial to release it.

This engages the shuttle mode.

When the power has just been turned on, turn the search

dial to its center position.

Press the SHTL/SLOW button to select the SHTL

(shuttle) mode or SLOW mode.

Turn the search dial.

The playback picture speed changes depending on dial

position.

Use setup menu No. 101 (SHTL MAX) to set maximum

speed in shuttle mode to ±8, ±16, ±32, ±60 or ±100×. The

dial has a click-stop at the center for viewing still pictures.

To go to another mode from the shuttle mode, press

the STOP

button or other button.

◆

NOTE:

• The playback audio is audible at speeds in the range –10 to

+10× from the audio monitor output.

• The playback audio in the search mode contains noise.

• Playing back a clip that spans a multiple of P2 cards at speeds

faster than ±1× may break up the sound in the transition to

another card; this is normal and not indicative of a malfunction.

• Playing back a clip at speeds faster than –10× may break up the

sound; this is normal and not indicative of a malfunction.

• Using search mode to play back a clip recorded in AVC-Intra

1080/23.98p format may result in uneven playback.

Jog Mode

Shuttle Mode and Slow Mode (SHTL Mode/SLOW Mode)

Содержание AJ-HPD2500P













































































































































































































































Результаты поиска

Содержание AJ-HPD2500P

Отзывы:

Похожие инструкции для AJ-HPD2500P

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500P, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500P

Отзывы:

Похожие инструкции для AJ-HPD2500P

Бренды по названию

Популярные бренды