Panasonic AJ-HPD2500P Скачать руководство пользователя

Страница: 215 / 236

For Long and Trouble-Free Operation: Error Messages

215

r Lon

g an

d T
roub

-F

ree O

rati
o

• A warning message is displayed whenever a warning occurs.

When no warnings have been detected, “NO WARNING” is displayed.

• When multiple warnings occur, turn the search dial to check the descriptions of each warning.

If “T&S&M” is selected in setup menu No. 006 (DISPLAY SEL), a message appears in the mode display whenever a warning

or error occurs.

WARNING Information Display

Monitor display

Description

Deck operation

Counter display

BUSY

Displayed while clip information is being read or when clip configuration has

changed. No operations can be performed while this display is on the screen.

[Meaning]

• A card has been inserted or removed

• Updating is in progress

• Recording post processing is in progress

• Other causes

Operation continues BUSY

CANNOT A.DUB

Displayed when audio voice-over cannot be recorded on a P2 card.

[Meaning]

• An attempt was made to record on a card that could not be used.

• An attempt was made to record when no card was inserted.

Operation continues CANTADUB

CANNOT LOOP

REC

Appears in LOOP REC mode when P2 card recording is not available.

[Meaning]

• An attempt was made to record to a write protected disk.

• An attempt was made to record on a card with no free space available.

• An attempt was made to record on a card that could not be used.

• Card status changed during recording.

• Recording was attempted when the unit was BUSY.

STOP

CANTLREC

CANNOT PLAY

Displayed when playback was interrupted due to a clip error or other factor.

[Meaning]

• An attempt was made to play a clip when no clips were present.

• An attempt was made to play back a card that cannot be used.

• The card could not be played back or playback stopped for some other reason.

• Playback was attempted when the unit was BUSY.

STOP

CANTPLAY

CANNOT REC

Displayed when data cannot be recorded on a P2 card.

[Meaning]

• An attempt was made to record to a write protected disk.

• An attempt was made to record data on a card with no more free memory space

on it.

• An attempt was made to record on a card with no free space available.

• Card status changed during recording.

• Recording was attempted when the unit was BUSY.

• VFR recording started but no active frame data was input.

STOP

CANT REC

CANNOT REC SD

Displayed when a memory card is protected, there is not enough space or

recording in PH/HA mode is not available.

(When an AJ-YCX250G AVCHD codec board (optional) is installed.)

Operation continues CANT REC

CHECK SD

Displayed when a non-compatible SD memory card, non-standard management

information or mismatched thumbnail data was recognized.

(When an AJ-YCX250G AVCHD codec board (optional) is installed.)

Operation continues CHK SD

INT SG

Displayed for the first two seconds when the REC button is pressed to enter the

EE mode and the VIDEO IN (SHIFT + EDIT MODE) button or the AUDIO IN (SHIFT

+ VIDEO) button is set to SG.

Operation continues INT SG

INVALID IN/OUT

POINT

Displayed when an attempt was made to set an IN or OUT point in a location

where such points cannot be set.

Operation continues Counter value

INVALID TRACK

SELECT

Displayed when no audio track is selected or 3 or more channels are selected in

a voice-over recording on a P2 card.

Only 2 channels can be recorded in a voice-over recording.

Operation continues CANTADUB

Содержание AJ-HPD2500P













































































































































































































































Результаты поиска

Содержание AJ-HPD2500P

Отзывы:

Похожие инструкции для AJ-HPD2500P

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500P, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500P

Отзывы:

Похожие инструкции для AJ-HPD2500P

Бренды по названию

Популярные бренды