Editing: Creating Playlists
103
Ed
it
in
g
second), then recording starts.
Recording stops when the OUT point is reached or the
STOP button is pressed.
2
The event is recorded and appears on the timeline.
◆
NOTE:
• For a live recording of 1 second or less, the event is recorded
for 1 second, and only the IN and OUT point section is set as an
event on the timeline. The light of the REC button or other
indication operates within this IN/OUT point section only.
• Track selection is possible, but the input data are always output
(FULL EE).
• An external device (RS-422A) or external input (live recording)
cannot be used as a player under the following conditions:
- When setup menu No.25 (SYSTEM FREQ) is set to 59-23, 60-
24, or 60-25
- When the playlist format is 30PN, 24PN, or 25PN
Use the following procedure to add selected clips to the
playlist. This operation registers the start of a clip as the IN
point and its end as the OUT point.
1
Switch to player operation.
Press the PLAYER button to switch to player operation.
2
Display player thumbnails.
During player operation, press the THUMBNAIL button to
display thumbnails on the player screen.
3
Use the cursor buttons to select the clip you want to
add to the event and press the SET button.
The frame of the clip turns blue.
◆
NOTE:
• To divide the video of an event using text memos during event
registration, choose [SETTING] - [DIVIDED APPEND] and select
[ON].
➝
Refer to “Dividing the video of the event using text memos”
(page 95).
• Registration is not possible if the number of events will exceed
100 after they are divided. In such a case, choose [SETTING] -
[DIVIDED APPEND] and select [OFF].
4
Press the MENU button.
5
Use the cursor buttons to choose [OPERATION] –
[APPEND SELECTED CLIPS].
6
Press the SET button.
An event is registered with the start of a selected clip as
the IN point and its end as the OUT point.
◆
NOTE:
• Clips not in the playlist format are indicated by red numbers and
cannot be registered.
• This operation inserts a clip right before the event at the cursor
location. It is not possible to add the clip at any other location or
through overwriting.
• It is possible to use CLIP
➝
LIST (SHIFT + ENTRY) button
instead of operation described in step 5 to add a clip as an
event.
• The clip cannot be added when its addition causes the number
of events in a track to exceed 100.
• You can also add multiple clips. The clips are added in the order
they are selected.
• The selected clip will be inserted even when the overwrite
editing is active.
Events registered on the timeline can be revised.
You can change IN and OUT points for events in frame
increments (in 4-frame increments at 24PN). The result of
trimming will depend on whether insert or overwrite editing is
selected.
Registering Events by Clip
4
3
,5
3
,6
2
1
Revising Registered Events
Trimming events
Operation Insert editing
Overwrite editing
Trim
(extend)
Subsequent events are
moved backwards by
an amount that
corresponds to the
extension.
Previous or
subsequent events will
be overwritten by an
amount corresponding
to the extension.
Trim
(contract)
Subsequent events are
moved forward by an
amount that
corresponds to the
contraction.
Previous and
subsequent events are
extended by an
amount corresponding
to the contraction.
