Panasonic AJ-CX4000, Руководство по эксплуатации

Страница: 75 / 223

– 75 –
Chapter 4 Operation — Menu settings
The items that can be set are as follows.
f [0.30]…[0.75]
[F-REC DYNAMIC LEVEL]
When [FILM-REC] is selected in [GAMMA MODE SEL], dynamic range is set.
No settings are changed if an item other than [FILM-REC] is selected.
The items that can be set are as follows.
f [200%] … [600%] (100% step)
[F-REC BLACK STR LEVEL]
When [FILM-REC] is selected in [GAMMA MODE SEL], black stretch is set.
No settings are changed if an item other than [FILM-REC] is selected.
The items that can be set are as follows.
f [0%]…[30%]
[V-REC KNEE SLOPE]
When [VIDEO-REC] is selected in [GAMMA MODE SEL], knee slope is set.
No settings are changed if an item other than [VIDEO-REC] is selected.
The items that can be set are as follows.
f [150%] … [500%] (50% step)
[V-REC KNEE POINT]
When [VIDEO-REC] is selected in [GAMMA MODE SEL], knee point is set.
No settings are changed if an item other than [VIDEO-REC] is selected.
The items that can be set are as follows.
f [30%]…[107%]
[BLACK GAMMA]
Sets the gamma curves of dark areas.
[ − 8]…[ − 1]
Compresses the dark area.
[0] Standard state
[1]…[8] Expands dark areas.
[B.GAMMA RANGE]
Sets the maximum level of compression/expansion.
[1] Around 20%
[2] Around 30%
[3] Around 40%
[KNEE SETTING]
[MANUAL KNEE]
Sets the knee operation mode.
The items that can be set are as follows.
f [ON], [OFF]
[KNEE MASTER POINT]
Sets the knee point position in 0.5% steps.
The items that can be set are as follows.
f [70.0%]…[107.0%]
[KNEE MASTER SLOPE]
Sets the knee inclination.
The items that can be set are as follows.
f [0]…[99]
[A.KNEE POINT]
Sets the auto knee point position in 1% steps.
This is enabled when the <OUTPUT>/<AUTO KNEE> switch is set to <CAM>/<ON>.
The items that can be set are as follows.
f [80%]…[107%]
[A.KNEE LEVEL]
Sets the auto knee level.
The items that can be set are as follows.
f [100]…[109]