Panasonic AJ-CX4000, Руководство по эксплуатации

Страница: 140 / 223

– 140 –
Chapter 5 Shooting — Setting of time data
4
Set the <TCG> switch to <F-RUN> or <R-RUN>.
5
Set to the [RECORDING] menu → [TC/UB] → [UB MODE] → [USER].
@ @
NOTE
t Thumbnail operations and menu operations on thumbnail operation section are not possible while the <TCG> switch is set to <SET>.
Frame rate information recorded on user bits
Recording the frame rate values for the image information shot/recorded according to the frame rate set in the [SYSTEM] menu → [REC FORMAT] to
user bits allows you to use on the editor (personal computer editing software).
Frame rate information
The relationship between frame rate, image pull-down, time code, and user bits is as follows.
Verification information on the right-hand six digits
Fixed values
REC mark
Camera video mode
Frame rate
r Camera video mode
The display of the camera video mode differs depending on the setting of following menus.
[FREQUENCY]
Recording frame frequency of [REC
FORMAT]
Display of frame rate Display of camera video mode
[59.94Hz] 23.98p 024 C
29.97p 030 8
59.94p 060 8
59.94i 060 0
[50.00Hz] 25.00p 025 A
50.00p 050 A
50.00i 050 2
Setting time code
1
Set the <DISPLAY> switch to <TC>.
2
Set the <TCG> switch to <SET>.
3
Set to the [RECORDING] menu → [TC/UB] → [DF/NDF].
f Set [DF] to advance the time code in the drop frame mode, and set [NDF] to advance it in the non-drop frame mode. However, note that the time
code runs by [NDF] at all times in the 23.98p mode.
4
Set the time code by the cursor operation buttons.
f Screen display
-
I : The digit to be set (flashing) moves to the right.
- Y : The digit to be set (flashing) moves to the left.
- ` : The value of the digit to set (flashing) is incremented by one.
- { : The value to set (flashing) is decremented by one.
5
Switch by the <TCG> switch.
To advance the time code by free run, switch to <F-RUN>, and to advance by recording run, switch to <R-RUN>.
r Setting range of time code
The range of the time code that can be set differs depending on the recording frame frequency of [REC FORMAT].
[FREQUENCY] Recording frame frequency of [REC
FORMAT]
Range of the time code that can be set
[59.94Hz] 59.94p, 29.97p, 59.94i 00:00:00:00 - 23:59:59:29
23.98p 00:00:00:00 - 23:59:59:23
[50.00Hz] 50.00p, 25.00p, 50.00i 00:00:00:00 - 23:59:59:24
@ @
NOTE
t Set the number of frames with a value that is a multiple of four when the recording frame frequency of [REC FORMAT] is set to 23.98p. The time code
to record will shift with any other value.
t Thumbnail operations and menu operations on thumbnail operation section are not possible while the <TCG> switch is set to <SET>.