Panasonic AJ-CX4000, Руководство по эксплуатации

Страница: 102 / 223

– 102 –
Chapter 4 Operation — Menu settings
[IP ADDRESS] Sets the IP address.
f Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
(Factory setting: [192.168.0.1])
[SUBNET MASK] Sets the subnet mask.
f
Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
(Factory setting: [255.255.255.0])
[DEFAULT GATEWAY] Sets the default gateway.
f If you do not use default gateway, set to [0.0.0.0].
f Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
f Disables the setting for the default gateway when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.
(Factory setting: [192.168.0.254])
[PRIMARY DNS] Sets the primary DNS server.
f Disables the setting for the primary DNS server when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.
(Factory setting: [0.0.0.0])
[SECONDARY DNS] Sets the secondary DNS server.
f Disables the setting for the secondary DNS server when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.
(Factory setting: [0.0.0.0])
[INFORMATION]
[STATUS]
Displays the status of the network function.
[UTILITY]
Performs the various operations related to the network function.
[NETWORK INITIALIZE]
Restores the network setting status to the factory settings.
[EASY IP SETTING]
Sets the time to accept EASY IP Setup Software.
The items that can be set are as follows.
f [DISABLE], [20 MIN.], [UNLIMITED]
(Factory setting: [DISABLE])
@ @
NOTE
t This is fixed to [UNLIMITED] when [NDI | HX] is selected in [NETWORK FUNC].
[EASY IP CAMERA TITLE]
Configure the individual device names to display in EASY IP Setup Software. (15 characters or less)
The camera title set here is also displayed as the individual device name in the NDI
| HX compatible switcher.
(Factory setting: [AJ-CX4000])
[SYSTEM] menu
Configure the settings regarding the recording format of video and audio.
[FREQUENCY]
Sets the system frequency.
The items that can be set are as follows.
f [59.94Hz], [50.00Hz]
(Factory setting: [59.94Hz] (when [AREA SETTINGS] is set to [AREA 1] or [AREA 2]), [50.00Hz] (when [AREA SETTINGS] is set to [AREA 3] or [AREA
4]))
@ @
NOTE
t The camera will restart when the setting is changed.
[FILE FORMAT]
Sets the file format for recording.
[P2] Sets to record in the MXF file format of P2 format.
[MOV] Sets to record in the MOV file format of MOV format.
(Factory setting: [MOV])
[REC FORMAT]
Sets the signal format and codec mode for recording.
f When [FREQUENCY] is set to [50.00Hz], and [FILE FORMAT] is set to [P2]
The items that can be set are as follows.