Panasonic AJ-CX4000, Руководство по эксплуатации

Страница: 82 / 223

– 82 –
Chapter 4 Operation — Menu settings
[CH4 LEVEL CONTROL]
The recording level can be manually adjusted when [CH4 LEVEL] which adjusts the recording level of the audio channel 4 is set to [MANUAL].
The items that can be set are as follows.
f [0]…[100]
(Factory setting: [70])
[CH1 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 1.
The items that can be set are as follows.
f [FRONT], [W.L.], [REAR], [OFF]
(Factory setting: [OFF])
[CH2 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 2.
The items that can be set are as follows.
f [FRONT], [W.L.], [REAR], [OFF]
(Factory setting: [OFF])
[CH3 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 3.
The items that can be set are as follows.
f [FRONT], [W.L.], [REAR], [OFF]
(Factory setting: [OFF])
[CH4 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 4.
The items that can be set are as follows.
f [FRONT], [W.L.], [REAR], [OFF]
(Factory setting: [OFF])
[CH1 LIMITER]
Enables/disables the limiter when the method to adjust the recording level for audio channel 1 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH2 LIMITER]
Enables/disables the limiter when the method to adjust the recording level for audio channel 2 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH3 LIMITER]
Enables/disables the limiter when the method to adjust the recording level for audio channel 3 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH4 LIMITER]
Enables/disables the limiter when the method to adjust the recording level for audio channel 4 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[HEAD ROOM]
Sets the headroom (standard level).
The items that can be set are as follows.
f [18dB], [20dB]
(Factory setting: [20dB] (when [AREA SETTINGS] is set to [AREA 1]/[AREA 2]), [18dB] (when [AREA SETTINGS] is set to [AREA 3]/[AREA 4]))
[OUTPUT SETTINGS]
[MONITOR SELECT]
Selects the signal format to output to the monitor when the <MONITOR SELECT> switch is set to <ST> (stereo).
The items that can be set are as follows.
f [STEREO], [MIX]
(Factory setting: [STEREO])
[AUDIO OUT LEVEL]
Selects the audio output level.