– 93 –
Chapter 4 Operation — Menu settings
[EXPAND]
Sets the enlarged display.
[PEAKING]
Sets the peaking display.
[SQUARES]
Sets the focus square display.
[PEAKING]
Displays in the combination of [EXPAND] and [PEAKING].
[SQUARES]
Displays in the combination of [EXPAND] and [SQUARES].
(Factory setting: [EXPAND])
[EXPAND MODE]
Sets the enlargement display function mode.
[10SEC]
Disables the enlarged display function after ten seconds have elapsed.
[HOLD]
Enables the enlarged display function until the <FOCUS ASSIST> button or the USER button assigned with [EXPAND] is
pressed.
[UNTIL REC]
Enables the enlarged display function until recording starts.
(Factory setting: [10SEC])
[EXPAND VALUE]
Adjusts the enlargement factor of the enlarged display function.
The items that can be set are as follows.
f
[
×
2], [
×
3], [
×
4]
(Factory setting: [
×
2])
[PEAKING LEVEL]
Sets the intensity of the peaking display.
The items that can be set are as follows.
f
[LOW], [MID], [HIGH]
(Factory setting: [MID])
[PEAKING COLOR]
Sets the color of the peaking display.
The items that can be set are as follows.
f
[RED], [GREEN], [WHITE]
(Factory setting: [RED])
[BLACK & WHITE]
Enables/disables the monochrome display.
[ON]
Enables the monochrome display.
[OFF]
Disables the monochrome display.
[DURING PEAKING]
Enables the monochrome display while the peaking display is enabled.
(Factory setting: [OFF])
[DETAIL]
Sets the intensity of the contour for the video to make it easier to focus.
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [ON])
[DETAIL LEVEL]
Sets the intensity of the contours.
The items that can be set are as follows.
f
[
−
3]…[3]
(Factory setting: [0])
[DETAIL FREQ.]
Adjusts the frequency of the contour highlights.
The items that can be set are as follows.
f
[HIGH], [LOW]
(Factory setting: [LOW])
[EI ASSIST]
[ZEBRA1 DETECT]
Sets the detection level of zebra pattern 1.
The items that can be set are as follows.
f
[0%]…[109%]
(Factory setting: [80%])
Содержание AJ-CX4000
