Painless PHANTOM KEY Series, Руководство пользователя

Страница: 8 / 30

8
TOOLS NEEDED
In addition to your regular hand tools, you will need, at least, the following tools:
Wire Crimping and Stripping Tools:
This style of hand crimper can be purchased
from just about any local auto parts store, home
improvement store or can also be purchased
online. You will need this style of crimper to
crimp the heat shrinkable insulated ring
terminals included in the small parts kit.
A good set of wire strippers are required. This
style of wire stripper is ideal for this harness
install because of its ability to properly strip wire
gauges 10 to 20. These are available from just
about any local auto part store, electrical supply
shop, home improvement store or can be
purchased online.
Volt/Ohm Meter:
A Volt/Ohm meter is always a good tool to have on
hand when installing any type of electrical
components into any vehicle. Most basic units
provide the two functions required to diagnose
electrical issues seen during a harness install. These
two functions are the ability to read DC Voltage and
electrical continuity or Ohms. They can be purchased
from any home improvement store, local hardware
store, and electrical supply shop and online.
Electric Drill & Bits:
A drill and bits are needed in order to use the screws
provided with the kit to mount the module and relay.
Heat Gun:
Very useful to shrink the heat-shrinkable terminals found
in the parts kit as well as the heat shrink.
Factory Wire Schematic
T
his isn’t necessary; however, having one handy is
good practice with any electrical job.
Chilton’s and
Haynes manuals, which can be found at most auto parts
stores and online, usually contain these schematics.
Soldering Iron
This isn’t necessary; however it will provide more positive connections to the large
amperage wires of the ignition switch connections over the splices provided in the kit.