Painless PHANTOM KEY Series, Руководство пользователя

Страница: 7 / 30

7
SMALL PARTS
Included with the Painless harness is a parts kit containing insulated ring terminals.
These terminals have a semi-transparent insulation that is heat shrinkable to provide a
weatherproof connection.
The un-insulated splices are to be used in conjunction with the supplied heat shrink.
These will be used when splicing into the power wires at the ignition switch
The blue Posi-Taps contained in the parts kit make connection quick and easy
without any cutting involved to the wires of your existing harness. Unlike traditional
“blade” style taps, which usually cut through the wire you are tapping onto, the Posi-
Tap, simply pierces the insulation. Proper installation of the Posi-Tap can be
accomplished in 4 easy steps:
1. Slide the slotted end over the wire/power source you are tapping onto. This will be a
pre-existing wire, not a wire found in the Painless kit.
2. Thread the main body of the Posi-
Tap onto the slotted end, ensuring
the needle pierces the wire. Smaller
gauge wires tend to move aside as
the needle comes down, causing
improper connections. Watch closely
to ensure this does not happen.
3.
Strip a ¼” of insulation away from the
wire you are connecting. This will be
a wire coming from the Phantom Key
harness.
4. Insert the stripped wire into the small
threaded end, and then thread it into
the Posi-Tap main body.
There are 2 different types of relays found in the parts kit, although they look
identical except for the print on them. The difference and which relay bases require the
correct relays is detailed on p.14 of this manual
. The lock and unlock relays will not
function correctly unless the correct relays are installed.