Painless PHANTOM KEY Series, Руководство пользователя

Страница: 26 / 30

26

Ensure the vehicle is in park or neutral, apply the brake, and push and hold the
stainless push button, this should engage the starter solenoid and crank for as
long as the button is held.
If your engine fails to start during the first crank, you will need to press the button
twice and re-try. The stainless push button will flash when the brake is applied
letting you know the vehicle is ready to start, and will illuminate when the vehicle
is running.
After testing is over and during the day to day use of your vehicle, you can enter
the vehicle, press the brake, push and hold stainless button to start without
toggling through the accessory and ignition positions.

Apply the brake, and push and hold the stainless push button for 2 seconds, this
should kill the engine and turn everything off.

Exit the vehicle and wait 60 seconds, the park lights should flash to indicate the
system is once again armed.

With the system armed, try to start the vehicle. Again, this is done by applying the
brake and pressing and holding the stainless push button. Nothing should
happen when this is attempted with the system armed.

Test the second key fob included with your kit, starting at the first step on the
previous page.

Once the second key fob is tested, and the system is armed. Walk out of range of
the vehicle, 20 feet or so, if possible do this with the vehicle still in sight with the
park lights still visible

Once out of range of the Phantom Key module, program the key fob to
AUTOMATIC mode, as described on p.24.

With the key fob now in AUTOMATIC mode, approach the vehicle. Avoid
pressing any buttons. As you get into range, the park lights should flash verifying
the Phantom Key indented the key fob and disarmed.

Get in the vehicle and attempt to start it, it should crank over.

Kill the engine, exit the vehicle, walk out of range of the vehicle, and 20 seconds
after the key fob is out of range the park lights should flash, indicating the module
had been armed.
PROGRAMMABLE MODES
The Module has 4 programmable features. These features can be changed
utilizing the small momentary push button. These features include: