Painless PHANTOM KEY Series, Руководство пользователя

Страница: 14 / 30

14
routing takes place, that way you can group wires together instead of routing each wire
individually.
At this time you will also need to determine how you are going to make connections
at the ignition switch. You can completely remove the ignition switch (if you do not need
to bypass any kind of column lock or factory installed security) or you can use either
variation of the “Quick Connect Method” outlined on page 19 if a key in the ignition is
still required.
Take notice that the 2 black connectors can be plugged in the wrong way. See the
drawing and instructions below for proper placement of these connectors.
Plug the 2 black connectors and the white connector found on the Phantom Key
harness into the Phantom Key module. The black connector with the Brown,
Orange, and Pink/black wires will plug into the module on the position closest to
the white connector.