background image

To deactivate any unwanted remote, first erase all codes:

Press and the hold “learn” button on motor unit until the learn indicator light goes out
(approximately 6 seconds). All previous codes are now erased. Reprogram each remote or
keyless entry you wish to use.

Model 372LM Security

®

2-Button Remote Control

The 372LM remote control can activate two separate
315MHz residential or commercial garage door openers
and/or gate openers.  The instructions for programming
garage door openers are illustrated below.  Please refer to
the original receiver programming for commercial and gate
products.

Both push buttons are factory programmed to work with
315MHz Security

®

receivers having a purple “learn”

button. The rolling code between these buttons and the
receiver changes with each use, randomly accessing over
100 billion new codes.

As an added feature, the push button on the right is
capable of learning or being trained to duplicate or match
another CGI manufactured fixed code or billion-code
remote. This feature is normally used when several
remotes are required to operate one fixed code device
such as a gate opener or commercial dock door. In this
case, the code transmitted to the receiver remains
constant or fixed, not using the Security

®

format.

NOTE:

The push button on the left cannot be changed

from Security

®

, only the right button is trainable.

KG

KG

1

3

9

7

5

1

3

9

7

5

1

2

3

1

2

1.Press and release the “learn” button

on the motor unit. The learn
indicator light will glow steadily for
30 seconds.

2. Within 30 seconds, press and hold

the button on the hand-held remote
that you wish to operate your
garage door.

3. Release the button when the motor

unit light blink. It has learned the
code. If light bulbs are not installed,
two clicks will be heard.

2

3

1

KG

KG

Instructions are described and illustrated below.

Figure 1

Right 

Push Button

(Multi-use)

2

3

1

KG

KG

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

To prevent possible SERIOUS INJURY or DEATH from a moving gate
or garage door:
• ALWAYS keep remote controls out of reach of children.  NEVER 

permit children to operate, or play with remote control 
transmitters.

• Activate gate or door ONLY when it can be seen clearly, is properly

adjusted, and there are no obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed.

NEVER permit anyone to cross path of moving gate or door.

WARNING

CAUTION

WARNING

WARNING

ATTENTION

AVERTISSEMENT

AVERTISSEMENT

AVERTISSEMENT

To Erase All Codes From Motor Unit Memory

1

Отзывы: