OPEN 812L VoIP ATA Router
User Guide
Page 6
OPEN Networks Pty Ltd
www.opennw.com
2.
Information About the ATA
2.1 Important
Safety
Instructions
WARNING!
BEFORE USING YOUR ATA EQUIPMENT, BASIC SAFETY INSTRUCTIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, INCLUDING
THE FOLLOWING:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. When cleaning this product, do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
4. Do not use this router in high humidity or high temperatures.
5. Do not open or repair the case yourself. If this router is too hot, turn off the power immediately
and have it repaired at a qualified service centre.
6. Avoid using this product and all accessories outdoors.
7. Place this router on a stable surface.
8. Only use the power adaptor that comes with the package. Using a different voltage-rating
adaptor may damage this router.
9. Slots and openings on the sides and top of the device are provided for ventilation. To protect it
from overheating, these openings must not be blocked or covered. The opening should never be
blocked by placing the product on the bed, sofa, rug or other similar surface. This product should
never be placed near or over a radiator or heat register. This product should not be placed in a
built-in installation unless proper ventilation is provided.
10. Do not allow anything sharp to rest on the cables. Do not locate this product where the cord
could be damaged by persons walking on it.
11. Do not overload wall outlet extension cords, as this can result in the risk of fire or electric shock.
12. To reduce the risk of electric shock, do not disassemble this product. Instead, when some repair
work is required, take the unit to the place of purchase. Opening or removing covers on the
router will void the warranty that comes with the product.
13. Unplug this product from the wall outlet and refer servicing to the place of purchase under the
following conditions:
a. When the power supply cord or plug is damaged or frayed;
b. If liquid has been spilled onto the product;
c. If the product has been exposed to rain or water;
d. If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions because improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation;
e. If the product has been dropped or damaged;
f. If the product exhibits a distinct change in performance.
SAVE THESE INSTRUCTIONS
