OPEN 812L VoIP ATA Router
User Guide
Page 107
OPEN Networks Pty Ltd
www.opennw.com
9.3.7 Call
Waiting
If someone calls you while you are speaking on the telephone, the OPEN 812L VoIP ATA
router indicates this by playing a Call Waiting Tone. You can answer this call by pressing the
flash/recall button or perform a hook flash.
How to use:
Step 1:
If the OPEN 812L VoIP ATA router is configured to use
Call Waiting
, press
*70
(optionally followed by #) on the telephone dial-pad to disable
Call Waiting
for the
duration of the following call.
Step 2:
You will hear a confirmed tone followed by the dial tone. If you hang up with or
without making the call, the ATA will enable the Call-Waiting tone again.
Step 3:
If the OPEN 812L VoIP ATA router is not configured to use Call Waiting, pressing
*70
results in fast-busy tone.
When the sequence of digits *70 is entered, the sequence could match the Call-
Waiting rule or the Default Number Call rule. To execute the command immediately,
press #. Otherwise, the action will execute after 4 seconds.
