OPEN 812L VoIP ATA Router
User Guide
Page 13
OPEN Networks Pty Ltd
www.opennw.com
3.3
Single-User Company Network Connection
Step 1:
Connect the power adapter provided into the ATA and plug the unit into a power
source. Make sure the PWR LED is steadily lit. Turn on the device.
Step 2:
Connect an Ethernet cable into the LAN port of the ATA using the Ethernet cable
provided. Connect the other end of the cable to your computer. The LAN LED should
be steadily lit.
Step 3:
Connect your company network to the WAN port at the back of the ATA using the
Ethernet cable provided. The WAN LED should be steadily lit.
Step 4:
Connect a phone cable to the LINE (Lifeline) port if using as a backup.
Step 5:
Connect your analogue phone(s) to the phone Port 1 and/or 2 using a phone cable
(RJ-11).
Figure 3-3: Single-User Company Network Connection
