OPEN 812L VoIP ATA Router
User Guide
Page 45
OPEN Networks Pty Ltd
www.opennw.com
Field Name
Description
DHCP address pool selection
: When User Defined
option is selected, the router will assign IP address
automatically from the DHCP address pool. User can set
up to 253 IP addresses in the address pool.
User Defined Start Address
: This is the starting IP
address of the DHCP pool for User Defined DHCP
Address Pool Selection. Range for User Defined Start
Address is x.x.x.x, where 0
≤
x
≤
255. The default value is
192.168.10.100.
User Defined End Address
: This is the last IP address in
the DHCP pool for User Defined DHCP Address Pool
Selection. The range for User Defined End Address is
x.x.x.x, where 0
≤
x
≤
255. The default value is
192.168.10.199.
DHCP Gateway Selection
: The default setting for the
DHCP Gateway Selection is AUTOMATIC. You can select
User Defined and specify User Defined Gateway Address.
The DHCP server will issue the User Defined Gateway
Address to the LAN DHCP clients.
User Defined Gateway Address
: The purpose for this
function is to have two gateway addresses, as the LAN IP
Address at the top of the LAN Configuration page is also a
gateway address.
Lease time
: The Lease time is the amount of time a
network user will be allowed to connect with the DHCP
server. If all fields are 0, the allocated IP addresses will be
permanently effective. The range of Lease Time fields is:
Days 0-36500, Hours 0-23, Minutes 0-59, Seconds 0- 59.
The default value is:
1 days 0 hours 0 minutes 0 seconds
.
DHCP Relay
If it is ENABLED, the DHCP requests from local PCs will
be forwarded to the DHCP server running on the WAN
side. To have this function working properly, please
disable the NAT to run on router mode only, disable the
DHCP server on the LAN port, and make sure the
routing table has the correct routing entry.
DHCP Relay Target IP
: If DHCP Relay is enabled,
DHCP requests are relayed to DHCP Target IP on the
WAN side. Displays the default DHCP Relay Target IP:
0.0.0.0.
Submit
Click the
Submit
button to submit the changes made.
Save Settings
Click the
Save Settings
this link to select from 2 options:
Save Settings/Reboot
or
Reboot Only
. Refer to
Section
6.2.8
for more information.
