OPEN 812L VoIP ATA Router
User Guide
Page 44
OPEN Networks Pty Ltd
www.opennw.com
6.2.2
LAN & DHCP Configuration
The
LAN and DHCP Configuration
allows you to set the configuration for your LAN settings and
DHCP server. You may enable or disable the DHCP server and the router’s DHCP relay
functions. The DHCP protocol allows your router to dynamically assign IP addresses to
computers on your network if they are configured to obtain IP addresses automatically.
Follow the steps below to access
LAN
.
Step 1:
To
access
LAN
, click the
Basic
link located at the top-right hand side of the page.
Step 2:
Click the LAN link located on the left menu. The following page appears:
Step 3:
To populate each of the LAN & DHCP configuration fields, refer to the table below
and the descriptions provided.
The following table describes the
LAN & DHCP Configuration
settings:
Field Name
Description
LAN Settings (Router
Configuration)
Assign a local IP Address and Subnet Mask to your router.
The factory default value for IP is 192.168.10.1 with a
Subnet Mask of 255.255.255.0.
Ensure that when you change the LAN Settings of the
router, you need to reset/renew the local computer IP
addresses.
DHCP Server
When enabled, the router will provide IP address to the
computers connected to the router.
