PART 3: CX-Server Runtime
OMRON
CHAPTER 2 – Introduction to CX-Server Projects
CX-Server Runtime_Page 9
This icon denotes a PLC.
This icon denotes a PLC also used as a gateway PLC.
This icon denotes that the device is open for communications. A device list cannot be opened
whilst open for communications.
A PLC device cannot be deleted or have its network or device settings altered if it is open for
communication (i.e. active). It cannot be modified in any way if the CX-Server project has
been opened as read-only. It cannot be deleted or its device type changed if it is acting as a
gateway.
Adding a PLC
The Device List dialog also permits addition of new PLCs to the open CX-Server project. Use the following
procedure to add a PLC.
1, 2, 3…
1. Click
on
the
Add
pushbutton in the Device List dialog. An entry is made in the list of
Configured Devices.
2.
Enter a name in the
PLC Name
field. This has a maximum length of 32 characters and
must be unique within the currently open CX-Server project file; it must
not
contain any
of the following characters: : / \ : ; , ? * & ! “
but can contain spaces and
international characters. The
PLC Name
field is case sensitive, i.e. if a name is entered
in upper case which already exists in lower case (and vice versa), a new PLC is created.
3.
Select options for the
Device
field and
Network
field for the new PLC. The list of
Configured Devices is updated. Clicking outside this new entry results in a confirmation
dialog being displayed. If required select the associated
Settings
pushbutton to refine the
Device Type Settings and Network Settings.
Refer to Chapter 3 - Communications for
further information.
4. If
the
Close
pushbutton or another PLC name is selected, a dialog appears asking for
confirmation of the changes just performed; select the
Yes
pushbutton to remove the
dialog and save the new PLC. Select the
Cancel
pushbutton to abort the operation.
Note
The default device name selected from the
Add
pushbutton in the Device List dialog
is unique within the CX-Server project, for instance ‘NewPLC1’.
Deleting a PLC
The Device List dialog also permits deletion of a PLC from an open CX-Server project. Use the following
procedure to remove a PLC.
1, 2, 3…
1.
Highlight the required PLC name in the Device List dialog and select the
Delete
button.
A dialog is displayed asking for confirmation of the deletion.
Содержание Sysmac WS02-CXPC1-EV3
