Omron Sysmac WS02-CXPC1-EV3, Руководство по эксплуатации

Страница: 104 / 390

PART 1: CX-Programmer
CHAPTER 4 – Reference OMRON
CX-Programmer _Page 78
CX-Programmer always monitors the backup status while operating in online mode.
Title Bar This shows the name of the dialog and the name of the connected PLC.
Warning
In this example the PLC memory backup is in progress and the warning
indicates that the PLC must not be powered off if the backup is to be
successful. If the power is removed the memory will be cleared.
Other warnings are:
Storing Program Area….
WARNING: DO NOT POWER OFF PLC DURING BACKUP
Backing up Parameter Area….
WARNING: DO NOT POWER OFF PLC DURING BACKUP
Message Other messages are:
Clearing Program Area….
Storing Program Area….
Backup Complete….
Program Backup status
These status bars show the progress of Clearing and Storing the program.
Sectors are memory blocks within the PLC memory. The sector number
information is only displayed when clearing the program and indicates the
number of sectors to be cleared and the sector currently being cleared.
Close Dialog when complete
Checking this box will cause the Backup Monitor dialog to close when the
backup is complete (default – unchecked).
Displaying Backup status in Status Bar
To display the Backup status indicator in the status bar, from the toolbar menu View|Windows|PLC Memory
Backup Status.
Whenever the connected PLC is backing up data to the Flash ROM, the backup status indicator will be
displayed as follows:
The indicator will flash during the backup operation. When the backup has been completed no indicator is
displayed.
Note: With the C-series PLCs, any of the following methods can be used for data transfer and
verification with a ROM Writer.
•
Using the CX-Programmer, transfer the program from the computer to the ROM Writer.
•
Transfer to program from the ROM Writer to a CX-Programmer project.
•
Verify programs between CX-Programmer and ROM Writer.
•
Create Intel Hex format files from CX-Programmer programs.
•
Input from an Intel Hex format file to the CX-Programmer project.