Omron Sysmac WS02-CXPC1-EV3, Руководство по эксплуатации

Страница: 115 / 390

PART 1: CX-Programmer
OMRON APPENDIX A – Toolbar and Keyboard Shortcuts
CX-Programmer _Page 89
PLC Toolbar
Work Online – toggles the connection to the selected PLC.
Toggle PLC Mounting – toggles monitoring for this PLC.
Work Online Simulator – toggles the connection to the Simulator.
Auto Online – toggles the connection to the PLC automatically.
Pause upon Trigger – begins a pause monitoring operation.
Pause – toggles monitoring On and Off.
Transfer to PLC – writes program information into the PLC.
Transfer from PLC – reads program information from the PLC.
Compare with PLC – compares program information with PLC.
Program Mode – switches the PLC into program operation mode.
Debug Mode – switches the PLC into debug operation mode.
Monitor Mode – switches the PLC into monitor operation mode.
Run Mode – switches the PLC into run operation mode
Differential Monitor – monitors for a change in a bit.
Data Trace – traces PLC memory contents.
Set Password – sets password protection in the PLC.
Release Password – releases password protection in the PLC.
Program Toolbar
View Monitoring – toggles monitoring on the active window.
Compile Program – performs a program check on the program.
Compile PLC Program – performs a program check on the PLC Program.
Begins Online Edit – starts an online-edit operation on the selected rungs.
Cancel Online-Edit – stops the online-edit, cancelling any changes.
Send On-line Edit Changes – transfers the changes made in the online-edit.
Go to on-line edit rung – jumps to the top of the online-editing rung.
Section/Rung Manager – shows a dialogue to edit sections and rungs.