![background image](http://html1.mh-extra.com/html/omron/sysmac-ws02-cxpc1-ev3/sysmac-ws02-cxpc1-ev3_operation-manual_743554198.webp)
PART 2: CX-Server PLC Tools
CHAPTER 8 – CX-Net Network Configuration Tool
OMRON
CX-Server PLC Tools_Page 56
shows a tick against it and the toolbar button is depressed).
When the device is closed, the details displayed in the
Connection
part of the CX-Net Network Configuration
tool are removed.
Configuring a PLC’s System Settings
The PLC Setup Component can be selected to define the settings which govern the PLC’s
behaviour; for example, connection mode. Select the
Configure PLC System Settings
button from the toolbar. Refer to
Chapter 4 - PLC Setup Component
for further information.
Alternatively, select PLC Setup from the PLC menu.
Scanning for PLC Connections
A serial scan can be performed which searches all PC COM ports to see if there are any currently attached PLCs
and, if found, what communication settings are being employed by those PLCs. This procedure is useful when
the configuration of the PLCs communication settings (i.e. baud rate) are unknown. Device information from
the results of the scan can then be copied into the CX-Server project, if required. Refer to
Chapter 8 -
Dragging Device Information
into a CX-Server Project.
When the Scan Serial Ports for PLCs dialogue is first displayed, it shows the results of the last scan to be
performed until the
Refresh
pushbutton has been clicked. Use the following procedure to scan for PLC
connections.
1, 2, 3…
1. Open a CX-Server project by selecting the
Open
button from the toolbar or create a new
project. If required, add a device to the CX-Server project by selecting
Add Device
from
the
Project
menu and edit the CX-Server project by selecting the
Edit Project
button
from the toolbar.
2. Select
Scan Serial Ports for PLCs
from the
Project
menu. The Scan Serial Ports for
PLCs dialogue is displayed.
3. Select either individual ports or select the
Select All
pushbutton to scan all ports from the
Available Ports
field.
4. Select either individual baud rates or select the
Select All
pushbutton to scan all baud
rates from the
Baud Rates
field.
5. Select either individual cable types or select the
Select All
pushbutton to scan all cable
types from the
Cable types
field.
6. Select
the
Next
pushbutton; the Scan Serial Ports For PLCs dialogue starts the scan. The
Status
field indicates the current progress. On completion, all currently connected PLCs
are listed in the
Drag and Drop Device Units
field.
Note:
If changes are made to PLC connections after a scan has been made, select the Refresh
pushbutton to update the displayed list.
Dragging Device Information into a CX-Server Project
The scan operation described in Chapter 8 - Scanning for PLC Connections, picks up device information from
the physically connected serial port devices. Once a scan has been performed, the Scan Serial Ports for PLCs
dialogue can remain open alongside the CX-Net Network Configuration tool. Dragging a device or network
unit from the
Drag & Drop Device Units
field into the
Project Device
field in the CX-Net Network
Configuration tool allows this device information to be added into the CX-Server project.
Use the following procedure to utilise a convenient shortcut for entering PLC details into a CX-Server project.
1, 2, 3…
1. Open a CX-Server project by selecting the
Open
button from the toolbar or create a new
project. If required, add a device to the CX-Server project by selecting
Add Device
from
the
Project
menu and edit the CX-Server project by selecting the
Edit Project
button
from the toolbar.
2. Perform a scan by selecting
Scan Serial Ports for PLCs
from the
Project
menu.
3. Select the required device in the
Drag and Drop Device Units
field.
4. Drag the device across to the
Project Devices
field in the CX-Net Network Configuration
tool.
Содержание Sysmac WS02-CXPC1-EV3
