manualshive.com logo in svg

Omron Sysmac WS02-CXPC1-EV3, Руководство по эксплуатации

Omron Sysmac WS02-CXPC1-EV3 - это продукт высокой надежности для автоматизации процессов. У вас есть возможность загрузить бесплатное руководство по эксплуатации на manualshive.com. Руководство поможет вам максимально эффективно использовать данный продукт. Не упустите возможность загрузить свой экземпляр уже сейчас.

Поделиться
Скачать
background image

PART 1: CX-Programmer 

CHAPTER 1 – Technical Specification

  

OMRON 

 
 

CX-Programmer _Page 4 

 

The software is supplied on CD-ROM and is installed easily from within Microsoft Windows.  The installation 
can be terminated at any point during the installation process. 

During the installation process, the Software Licence Agreement will be displayed.  This informs you of 
Omron’s terms and conditions concerning the software licensing of CX-Programmer.  These must be read and 
agreed with before continuing. 

1, 2, 3… 

1.  Insert the CD in the appropriate CD-ROM drive.  If autorun is set, you will automatically 

be taken to the Install screen.  If not, select 

Start

 then the 

Run

 option from the 

Start

 

pushbutton on the Microsoft Windows taskbar. 

 

2. Click 

the 

Browse

 pushbutton to select the setup file from the CD-ROM drive. 

 

3. Click 

the 

OK

 pushbutton to initiate the installation.  Follow the on-screen instructions. 

 

Entering a Licence Number 

During the installation, a licence number must be entered.  The licence number is supplied with the purchase of 
CX-Programmer.  There are eight different licence number types representing eight different modes of 
installation.  Upgrade licence numbers are available on request. 

The eight installation modes are: 

Full (1 User) 

Installation providing full functionality support for all PLCs.  
The licence is restricted to a single user installation. 

Full (3 User) 

Installation providing full functionality support for all PLCs.  
The licence is restricted to a three user installation. 

Full (10 User) 

Installation providing full functionality support for all PLCs.  
The licence is restricted to a ten user installation. 

Multiple User 

Installation providing full functionality support for all PLCs.  
The licence is restricted to a multiple user installation. 

Junior 

Installation providing full functionality support for the junior range PLCs only 
CPM1 (CPM1A), CPM2*, SRM1, SRM1-V2. 
The licence is restricted to a single user installation. 

Multiple User 
(Junior) 

Installation providing full functionality support for the junior range PLCs only 
CPM1 (CPM1A), CPM2*, SRM1, SRM1-V2. 
The licence is restricted to a multiple user installation. 

Trial 

Installation providing full functionality support for all PLCs.  Its use is limited to 30 days 
from time of installation. 
The licence is restricted to a single user installation. 

Demonstration 

Installation providing limited functionality support for all PLCs.  Full system operation is 
provided but projects can not be saved or printed. 

If no licence number is entered then CX-Programmer is automatically installed in demonstration mode. 

If CX-Server was included in the installation then on completion of the CX-Programmer installation a number 
of dialogs will prompt for information concerning the installation of CX-Server and its components. 

Help and How to Access it 

CX-Programmer comes with a detailed context-sensitive help system.  At any time while using the software, it 
is possible to get help on the particular point that is currently being worked on, or on general aspects of CX-
Programmer.  This system is intended to complement the manual, by providing an on-line reference to specific 
functions of the software.  The manual is designed to provide tutorial information and discuss the various 
facilities offered by CX-Programmer. 

♦ 

Help topics (available from the

 Help 

menu); 

♦ 

Instruction Reference (available from the 

Help

 menu and from the instruction entry dialogue); 

♦ 

Context sensitive help; 

♦ 

About (available from the 

Help

 menu); 

♦ 

Status Bar. 

Содержание Sysmac WS02-CXPC1-EV3







































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Sysmac WS02-CXPC1-EV3

Danbit MB800 User Manual preview
MB800
Бренд: Danbit Страницы: 70
IEI Technology WSB-9454 User Manual preview
WSB-9454
Бренд: IEI Technology Страницы: 234
Quectel LC76G Series User Manual preview
LC76G Series
Бренд: Quectel Страницы: 34
TYAN S3950 Manual preview
S3950
Бренд: TYAN Страницы: 82
Gigabyte MD72-HB0 User Manual preview
MD72-HB0
Бренд: Gigabyte Страницы: 93
JS Automation FA-G41A User Manual preview
FA-G41A
Бренд: JS Automation Страницы: 18
MATSONIC MS7127C User Manual preview
MS7127C
Бренд: MATSONIC Страницы: 77
JETWAY I407R1A User Manual preview
I407R1A
Бренд: JETWAY Страницы: 52
Renesas ISL8273M User Manual preview
ISL8273M
Бренд: Renesas Страницы: 17
Gigabyte Z370 AORUS Gaming 7 User Manual preview
Z370 AORUS Gaming 7
Бренд: Gigabyte Страницы: 48
MSI C807MS-E33 Series Manual preview
C807MS-E33 Series
Бренд: MSI Страницы: 124
JETWAY HBJC390F841VAG34B Technical Manual preview
HBJC390F841VAG34B
Бренд: JETWAY Страницы: 44
Gigabyte 686LX3 User Manual preview
686LX3
Бренд: Gigabyte Страницы: 20
ECS PN1 SLI2 Extreme User Manual preview
PN1 SLI2 Extreme
Бренд: ECS Страницы: 62
TYAN S2257 THUNDER 2400 Manual preview
S2257 THUNDER 2400
Бренд: TYAN Страницы: 105
Texas Instruments DS125BR800EVM User Manual preview
DS125BR800EVM
Бренд: Texas Instruments Страницы: 14
DFI KD300-H110 User Manual preview
KD300-H110
Бренд: DFI Страницы: 79
Foxconn A9DA Series User Manual preview
A9DA Series
Бренд: Foxconn Страницы: 115

Бренды по названию

Популярные бренды

Загрузить еще бренды