![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3mv-a2001/sysdrive-3g3mv-a2001_user-manual_742837194.webp)
7-4
Note
Address 00 is for broadcast purposes only. Do not set the Slave to this address, otherwise the
Slave will not communicate.
H
Communications Baud Rate and Parity Selection (n154 and n155)
•
Set the baud rate and parity according to the communications conditions of the Master.
n154
RS-422/485 Baud Rate Selection
Register
019A Hex
Changes during
operation
No
Setting
range
0 to 3
Unit of
setting
1
Default setting
2
Set Values
Value
Description
0
2,400 bps
1
4,800 bps
2
9,600 bps
3
19,200 bps
n155
RS-422/485 Parity Selection
Register
019B Hex
Changes during
operation
No
Setting
range
0 to 2
Unit of
setting
1
Default setting
0
Set Values
Value
Description
0
Even
1
Odd
2
No parity
In normal serial communications, data is configured in single bytes, and messages are created by
stringing together multiple bytes of data. The parity check described here sets the check for each byte of
data. Set the parity check method that is required by the Master.
Note
The entire message is checked by a separate check code called “CRC-16,” so the communica-
tions data will be checked even if no special parity check is performed.
H
Send Wait Time Setting (n156)
•
Set this parameter to an awaiting period for returning a response after the DSR (data-send-request)
message is received from the Master.
n156
RS-422/485 Send Wait Time
Register
019C Hex
Changes during
operation
No
Setting
range
10 to 65 (ms)
Unit of
setting
1 ms
Default setting
10
Communications
Chapter 7
Содержание SYSDRIVE 3G3MV-A2001
