This guide is a supplement to the application manual supplied with the drive.
Improper wiring can cause bodily harm and damage the equipment. Follow
good wiring practices and all applicable codes and standards.
MODEL NAMEPLATE
• Verify you received the correct model drive.
• Compare the drive nameplate VOLTS and AMPS
rating with the motor or compressor nameplate.
• Check that the power source meets the input
power requirements.
• Output power from the drive should match the
motor requirement.
KEYPAD AND DISPLAY
• Use
and
arrows to navigate a menu
list and change parameter values.
• Use
arrow to enter parameter group
mode and
arrow to back up one step.
AC POWER WIRING
• Locate the power terminal strip.
• Check the AC voltage rating shown
on the drive nameplate with the AC
incoming voltage.
• Turn the power off and make
connections.
I/O WIRING
Refer to the
EVH Install Manual
for
the complete I/O wiring guide.
Copeland
™
Commercial HVACR
Variable Frequency Drive – EVH Series
QUICK START GUIDE
