Omron SYSDRIVE 3G3MV-A2001, Руководство пользователя

Страница: 251 / 344

8-9
Fault
display
Probable cause and remedy Fault name and meaning
BUS Communications error
(Option Unit)
A communications error
occurred at the Option Unit.
•
Communications cable wired incorrectly, short-circuited, or
disconnected.
→
Check and correct the communications cable wiring.
•
Data destroyed by noise.
→
Change to a dedicated communications cable or to
shielded cable, and mask the shield or ground it at the
power supply.
→
Use a dedicated communications power supply, and
connect a noise filter to the power supply input side.
•
Option Unit is damaged.
→
If communications errors frequently occur and there is no
problem with the wiring, replace the Option Unit.
OFF Power supply error
Control power supply voltage
is insufficient.
•
No power supply is provided.
→
Check and correct the power supply wire and voltage.
•
Terminal screws are loose.
→
Check and tighten the terminal screws.
•
Operator connectors are faulty.
→
If only the Operator indicator is not lit, (i.e., if the RUN
and ALARM indicators are lit), check and correct the
Operator’s connectors.
•
The Inverter is damaged.
→
Replace the Inverter.
Note This fault is displayed for 200 and 400-V, 5.5-/7.5-kW Inverters only.
Maintenance Operations Chapter 8