Omron SYSDRIVE 3G3MV-A2001, Руководство пользователя

Страница: 306 / 344

10-4
Param-
eter
No.
Ref-
er-
ence
page
Changes
during
opera-
tion
Default
setting
Unit
of
set-
ting
Set-
ting
range
Description Name Regis-
ter No.
(Hex)
n004 0104 Frequency
reference
selection Used to set the input method for the
frequency reference in remote mode.
0: Digital Operator
1: Frequency reference 1 (n024)
2: Frequency reference control termi-
nal (0 to 10 V)
3: Frequency reference control termi-
nal (4 to 20 mA)
4: Frequency reference control termi-
nal (0 to 20 mA)
5: Pulse train reference control termi-
nal is enabled.
6: Frequency reference through
RS-422/RS-485 is enabled.
7: Multi-function analog voltage input
(0 to 10 V) is enabled.
8: Multi-function analog current input
(4 to 20 mA) is enabled.
9: Frequency reference input through
DeviceNet communications is
enabled.
0 to 9 1 0 No 5-11
n005 0105 Stopping
method
selection Used to set the stopping method for
use when the STOP command is
input.
0: Decelerates to stop in preset time.
1: Coasts to stop (with output turned
OFF by the STOP command)
0, 1 1 0 No 5-29
n006 0106 Reverse rota-
tion-prohibit
selection Used to select the operation with the
reverse command input.
0: Reverse enabled (accept).
1: Reverse disabled (not accept).
0, 1 1 0 No 5-28
n007 0107 STOP Key
function
selection Used to enable/disable the STOP Key
in remote mode with n003 for opera-
tion mode selection not set to 0.
0: STOP Key of the Digital Operator
enabled.
1: STOP Key of the Digital Operator
disabled.
0, 1 1 0 No 5-10
n008 0108 Frequency
reference
selection in
local mode Used to set the input method for the
frequency reference in local mode.
0: The FREQ adjuster of the Digital
Operator enabled.
1: Key sequences on the Digital
Operator enabled. (Set in n024.)
0, 1 1 0 No 5-12
n009 0109 Operator fre-
quency set-
ting method
selection Used to enable the Enter Key for set-
ting the frequency reference with the
Increment and Decrement Keys.
0: The value is entered with the Enter
Key pressed.
1: The value is enabled when the
value is input.
0, 1 1 0 No 5-22
List of Parameters Chapter 10