Omron SYSDRIVE 3G3MV-A2001, Руководство пользователя

Страница: 80 / 344

3-6
D
Status Monitor
Item Display Display
unit
Function
U-01 Frequency reference Hz (see
note 1)
Monitors the frequency reference. (Same as FREF)
U-02 Output frequency Hz (see
note 1) Monitors the output frequency. (Same as FOUT)
U-03 Output current A Monitors the output current. (Same as IOUT)
U-04 Output voltage V Monitors the internal output voltage reference value of the
Inverter.
U-05 DC bus voltage V Monitors the DC voltage of the internal main circuit of the
Inverter.
U-06 Input terminal status --- Shows the ON/OFF status of inputs. p
: ON : OFF
Not
used
Terminal S1: Multi-function input 1
Terminal S2: Multi-function input 2
Terminal S3: Multi-function input 3
Terminal S4: Multi-function input 4
Terminal S5: Multi-function input 5
Terminal S6: Multi-function input 6
Terminal S7: Multi-function input 7
U-07 Output terminal ---
Shows the ON/OFF status of outputs.
p
status
: ON : OFF
Not
used
Terminal MA: Multi-function contact output
Terminal P1: Multi-function photo-coupler
output 1
Terminal P2: Multi-function photo-coupler
output 2
U-08 Torque monitor % Displays the torque being currently output as a percentage of
the rated motor torque. This display can only be made in
vector control mode.
U-09 Error log (most
)
--- The four most recent errors can be checked. g (
recent one)
Error
Error
generation
item
Note “1” means that the latest error is displayed. Press the
Increment Key to display the second latest error. A maxi-
mum of four errors can be displayed.
U-10 Software No. --- OMRON use only.
U-11 Output power W Monitors the output power of the Inverter. (See note 2.)
U-13 Accumulated
operating time x10H Monitor the accumulated operating time in 10-second units.
(See note 3.)
Preparing for Operation and Monitoring Chapter 3