Omron CP1L - 12-2007, Руководство по эксплуатации

Страница: 451 / 673

416
Analog I/O Units
Section 7-4
Main Analog I/O Unit
Specifications
Analog I/O Units are connected to the CP1L CPU Unit. Up to three Units can
be connected, including any other Expansion Units and Expansion I/O Units
that are also connected.
Note (1) The conversion time is the total time for 2 analog inputs and 1 analog out-
put.
(2) With analog outputs it is possible to use both voltage outputs and current
outputs at the same time. In this case however, the total output current
must not exceed 21 mA.
SYSMAC
CP1L
L1 L2/N COM 01 03 05 07 09 11 01 03 05 07 09 11
00 02 04 06 08 10 00 02 04 06 08 10
00 01 02 03 04 06 00 01 03 04 06
COM COM COM COM 05 07 COM 02 COM 05 07
IN
OUT
IN OUT
V O UT CO M I IN 1 V IN 2 CO M2
I O U T V IN 1 CO M1 I IN 2
MAD01
C H C H E X P
IN
00
C H
C H
02 04 06 08 10
OUT
01 C OM 03 05 07 09 11
C OM CO M C OM 03 CO M 06
00 01 02 04 05 07
00 01 02 03 04 05 06 07
08 09 10 11
20EDR1
C H 00 01 02 03 04 05 06 07
N C
N C
N C
C H
E X P
IN
00 02
01 C OM 03
C OM 05 07
04 06
C H 00 01 02 03
08 09 10 11
8ED
E X P
CP1L CPU Unit
CP1W-20EDR1/
CPM1A-20EDR1
Expansion I/O Unit CP1W-8ED/
CPM1A-8ED
Expansion I/O Unit CPM1A-MAD01
Analog I/O Unit
1 analog output
2 analog inputs
A maximum of 3 Expansion Units or
Expansion I/O Units can be connected.
Item Voltage I/O Current I/O
Analog
Input
Section Number of inputs 2
Input signal range 0 to 10 V/1 to 5 V 4 to 20 mA
Max. rated input
±
15 V
±
30 mA
External input impedance 1 M
Ω
min. 250
Ω
rated current
Resolution 1/256
Accuracy 1.0% full scale
A/D conversion data 8-bit binary
Analog
Output
Section
(See
note 2.) Number of outputs 1
Output signal range 0 to 10 V or
−
10 to 10 V 4 to 20 mA
Max. external output current 5 mA ---
Allowable external output load resistance --- 350
Ω
Resolution 1/256 (1/512 when the output signal range is
−
10 to 10 V)
Accuracy 1.0% of full scale
Set data 8-bit signed binary
Conversion time 10 ms max. per Unit (See note 1.)
Isolation method Photocoupler isolation between I/O terminals and PC signals.
No isolation between analog I/O signals.
Current consumption 5 VDC: 66 mA max., 24 VDC: 66 mA max.