Omron 3G3AX-MX2-PRT-E, Руководство пользователя

Страница: 56 / 116

42
Accessing Parameters
Section 4-5
Step 4 Storing changed parameter(s): To store changed parameter(s) in non-vola-
tile memory, write a 1 to Option Board parameter 971:
Step 5 Resetting the Option Board: To reset the Option Board, write a 2 followed
by a 1 to Option Board parameter 972:
Without changing AK or PNU, set PWE=1
The Option Board correctly executes the task and resets before responding.
After the PROFIBUS master has re-connected, the Option Board tries to exe-
cute the task a second time. The task fails because parameter 972 may only
be set to 1 if the current value is 2.
4-5-1-2 Accessing Inverter Parameters
When you address Inverter parameters, IND is used to select the parameter
group.
PNU represents the parameter number in that group. To address P160 for
example set IND=10h (P
@@@
) and PNU=0A0h (160).
Note It is important to use array tasks (6, 7 or 8) when accessing Inverter parame-
ters. IND is only interpreted if the Option Board executes an array task.
Table 44 Parameter Processing Message Area-Initiating NV Store
Change WORD parameter value task Write
Parameter number 971
Output area [hex] 2 3CB 00 00 0000 0001
Word offset +0 +1 +2 +3
Function AK PNU IND - PWE
Input area [hex] 1 3CB 00 00 0000 0000
Task success (WORD parameter) response
Table 45 Parameter Processing Message Area-Prepare Reset
Change WORD parameter value task Write
Parameter number 972
Output area [hex] 2 3CC 00 00 0000 0002
Word offset +0 +1 +2 +3
Function AK PNU IND - PWE
Input area [hex] 1 3CC 00 00 0000 0000
Task success (WORD parameter) response
Table 46 Parameter Processing Message Area-Initiate Reset
Change WORD parameter value task Write
Parameter number 972
Output area [hex] 2 3CC 00 00 0000 0001
Word offset +0 +1 +2 +3
Function AK PNU IND - PWE
Input area [hex] 7 3CC 00 00 0000 0011
Task failed (Parameter) response
Error: Not allowed due to operating state
Table 47 IND Values and Parameter Groups for Parameter Processing
Parameter IND Parameter IND Parameter IND Parameter IND
A
@@@
01h C
@@@
03h F
@@@
06h P
@@@
10h
b
@@@
02h d
@@@
04h H
@@@
08h U
@@@
15h
I111E-EN-02+3G3AX-MX2-RX-PRT+OperManual.book Seite 42 Donnerstag, 8. September 2011 11:53 11