Olivetti d-Copia 600, Руководство по обслуживанию

Страница: 260 / 454

1-6-30
End
Start
Enter maintenance mode.
Enter 054 using the numeric keys.
Yes
Yes
No
No
Press the start key.
Press the interrupt key.
Press the start key
to make a test copy.
Decrease the value using the cursor down key.
Setting range: -10 to +10
Initial setting: 0
The greater the value, the larger the amount of slack;
the smaller the value, the smaller the amount of slack.
The new setting is stored.
Is the leading
edge of the image missing
or varying randomly (copy
example 1)?
Is the copy
paper Z-folded (copy
example 2)?
Increase the value using the cursor up key.
Press the start key.
Press the stop/clear key to
exit maintenance mode.
(8-6) Adjusting the amount of slack in the paper at the vertical conveying
Make the following adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper is
Z-folded.
<Procedure>
Figure 1-6-56
Original Copy
example 1
Copy
example 2
Service Manual Y104350-7