manualshive.com logo in svg

Olivetti d-Copia 600, Руководство по обслуживанию

Описания продукта Olivetti d-Copia 600: Бесплатное руководство по эксплуатации доступно для загрузки на manualshive.com. Руководство содержит инструкции по использованию устройства и его функциям. Скачайте руководство по эксплуатации сейчас, чтобы максимально эффективно использовать свою Olivetti d-Copia 600.

Поделиться
Скачать
background image

1-5-5

Paper feed 
section

27

Multiple sheets in cassette 
paper feed section 4

Feed switch 2 (FSW2) does not turn off within 1300 ms of deck 
conveying switch 1 (DKCSW1) turning on.
Feed switch 2 (FSW2) does not turn off within specified time 
<1100 ms (806 ms) for 80 cpm/1415 ms (806 ms) for 60 cpm> 
of feed switch 4 (FSW4) turning on.
Feed switch 2 (FSW2) does not turn off within specified time 
<1500 ms (1100 ms) for 80 cpm/1929 ms (1100 ms) for 60 
cpm> of feed switch 5 (FSW5) turning on.
Feed switch 2 (FSW2) does not turn off within specified time 
<1890 ms (1386 ms) for 80 cpm/2432 ms (1386 ms) for 60 
cpm> of its turning on.
Feed switch 2 (FSW2) does not turn off within 670 ms of its 
turning on.
Feed switch 2 (FSW2) does not turn off within 670 ms of deck 
conveying switch 2 (DKCSW2) turning on.
* Description in ( ) is written for the specified time of less then 
A4/11" x 8

1/2

" size.

Paper con-
veying sec-
tion

28

Multiple sheets in deck 
paper feed section 1

Timing switch 1 (TIMSW1) does not turn off within 700 ms of 
its turning on.
Deck conveying switch 1 (DKCSW1) does not turn off within 
550 ms of timing switch 1 (TIMSW1) turning off.

29

Multiple sheets in deck 
paper feed section 2

Deck conveying switch 2 (DKCSW2) does not turn off within 
550 ms of deck conveying switch 1 (DKCSW1) turning off.

30

Multiple sheets in optional 
side feeder paper feed 
section

Side feeder feed switch (SFFSW) does not turn off within 700 
ms of its turning on.

32

Misfeed in registration

Feed switch 1 (FSW1) does not turn on within specified time 
<800 ms (586 ms) for 80 cpm/1029 ms (586 ms) for 60 cpm> 
of feed switch 2 (FSW2) turning on.
* Description in ( ) is written for the specified time of less then 
A4/11" x 8

1/2

" size.

33

Misfeed in registration

Feed switch 1 (FSW1) does not turn off within specified time 
<800 ms (586 ms) for 80 cpm/1029 ms (586 ms) for 60 cpm> 
of feed switch 2 (FSW2) turning on.
Feed switch 1 (FSW1) does not turn off within 666 ms of its 
turning on (when paper is fed from optional side feeder).
Feed switch 1 (FSW1) does not turn off within specified time 
(1181 ms for 80 cpm/1520 ms for 60 cpm) of its turning on 
(when paper is fed from MP tray).
Feed switch 1 (FSW1) does not turn off within specified time 
<4090 ms (3000 ms) for 80 cpm/5263 ms (3000 ms) for 60 
cpm> of its turning on (when paper is fed from duplex section).
Feed switch 1 (FSW1) does not turn off within specified time 
(800 ms for 80 cpm/1029 ms for 60 cpm) of feed switch 2 
(FSW2) turning on.
Feed switch 1 (FSW1) does not turn off within specified time 
(1000 ms for 80 cpm/1286 ms for 60 cpm) of its turning on.
Feed switch 1 (FSW1) does not turn off within specified time 
(2000 ms for 80 cpm/2573 ms for 60 cpm) of its turning on 
(when paper is fed from duplex section).
Feed switch 1 (FSW1) does not turn off within specified time 
(1890 ms for 80 cpm/2432 ms for 60 cpm) of its turning on 
(when paper is fed from MP tray).
* Description in ( ) is written for the specified time of less then 
A4/11" x 8

1/2

" size.

Section

Jam code

Description

Conditions

Y104350-7 Sevice Manual                                                                    

Содержание d-Copia 600







































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для d-Copia 600

WaxJet 6100 Service Reference Manual preview
6100
Бренд: WaxJet Страницы: 131
Oki C5800 Brochure & Specs preview
C5800
Бренд: Oki Страницы: 6
Oki C7300 Référence Matérielle preview
C7300
Бренд: Oki Страницы: 44
Oki C7500 Enhancements Manual preview
C7500
Бренд: Oki Страницы: 13
Oki C7300 Software Installation Manual preview
C7300
Бренд: Oki Страницы: 20
Oki C7300 Specifications preview
C7300
Бренд: Oki Страницы: 2
Oki C5300 Setup Manual preview
C5300
Бренд: Oki Страницы: 28
Samsung SCX-3405FW Manual Del Usuario preview
SCX-3405FW
Бренд: Samsung Страницы: 347
Samsung SCX 6555N - MultiXpress Mono Multifunction Manual Del Usuario preview
SCX 6555N - MultiXpress Mono Multifunction
Бренд: Samsung Страницы: 180
Samsung SCX-4300 - SCX 4300 B/W Laser License Agreement preview
SCX-4300 - SCX 4300 B/W Laser
Бренд: Samsung Страницы: 18
Samsung SCX-4521FG - B/W Laser - All-in-One User Manual preview
SCX-4521FG - B/W Laser - All-in-One
Бренд: Samsung Страницы: 215
Samsung SCX 6320F - B/W Laser - All-in-One User Manual preview
SCX 6320F - B/W Laser - All-in-One
Бренд: Samsung Страницы: 332
Samsung SCX 4828FN - Laser Multi-Function Printer User Manual preview
SCX 4828FN - Laser Multi-Function Printer
Бренд: Samsung Страницы: 248
Samsung SCX 4725FN - B/W Laser - All-in-One User Manual preview
SCX 4725FN - B/W Laser - All-in-One
Бренд: Samsung Страницы: 253
Samsung ML 2851ND - B/W Laser Printer User Manual preview
ML 2851ND - B/W Laser Printer
Бренд: Samsung Страницы: 179
Samsung ML 2510 - B/W Laser Printer Manual Del Usuario preview
ML 2510 - B/W Laser Printer
Бренд: Samsung Страницы: 84
Samsung ML 1740 - B/W Laser Printer Manual Del Usuario preview
ML 1740 - B/W Laser Printer
Бренд: Samsung Страницы: 152
Samsung ML 1630 - B/W Laser Printer User Manual preview
ML 1630 - B/W Laser Printer
Бренд: Samsung Страницы: 142

Бренды по названию

Популярные бренды

Загрузить еще бренды