Olivetti d-Copia 600, Руководство по обслуживанию

Страница: 154 / 454

1-4-82
Adjusting date and time
Sets the date and time.
Before proceeding to adjust the date and time, com-
plete Setting Time Difference (Time Zone).
1. Select [Date/Time] using the cursor up/down keys
and press [Change #].
2. Specify [Year], [Month], [Day] and [Time] using the
[+] or [-] key.
To specify summertime (daylight saving), press
[On].
Setting time difference (time zone)
Sets the time zone in reference to Greenwich Mean
Time.
1. Select [Time difference] using the cursor up/down
keys and press [Change #].
2. Select the time zone using the [+] or [-] key.
Changing management code
Changes the management code.
The default management code is 8000 for 80 cpm
model and 6000 for 60 cpm model.
When installing the optional security kit, the default
management code is 60006000 for 60 cpm model and
80008000 for 80 cpm model.
1. Select [Management code change] ([Change
MGMT code with #]) using the cursor up/down keys
and press [Change #].
2. Enter the new management code using the numeric
keys.
The new management code must be a number
comprising of four digits from 0000 to 9999.
When installing the optional security kit, the new
management code must be a number comprising of
eight digits from 00000000 to 99999999.
Activating auto sleep
Activates the sleep mode.
1. Select [Auto sleep] using the cursor up/down keys
and press [Change #].
2. Select [On] or [Off].
Activating auto clear
When this setting is activated, the copier reverts to the
state after warm-up if no copies are made.
1. Select [Auto Clear] using the cursor up/down keys
and press [Change #].
2. Select [On] or [Off].
Prioritizing copying over printing
Assigns a higher priority to processing copying jobs
than printing jobs.
1. Select [Copy Job Priority] using the cursor up/down
keys and press [Change #].
2. Select [On] or [Off].
Erasing hard disk contents
Sets the method for erasing the contents of the hard
disk when the copier is equipped with the optional
security kit.
1. Select [Hard Disk Delete Method] using the cursor
up/down keys and press [Change #].
2. Select [Once Overwrite] or [3-time Overwrite].
(5) Weekly timer
Weekly timer
Sets the time to turn on and off the copier for each day
of the week.
1. Select the day to program the timer and press
[Change #].
2. To turn on and off the copier at a specific time of
day, press [Select work time].
Specify the time to turn on the copier in SW ON.
Specify the time to turn off the copier in SW OFF.
To turn on the copier all the time for the day, press
[All day-ON].
To turn off the copier all the time for the day, press
[All day-OFF].
3. To program the timer for the other days, repeat
steps 1 to 2.
Temporarily cancel the weekly timer
Cancels the weekly timer for the specific days.
1. Select the day and press [Change #].
2. Press [On].
3. To cancel the weekly timer for other days, repeat
steps 1 to 2.
Weekly timer On/Off
Activates or deactivates the weekly timer.
1. Select [On] or [Off].
2. Press [Close].
3. Press [End].
(6) Configuring MP tray
Specifying the paper size to the MP tray
Auto detect
1. Press [Auto Detection].
2. Select [Centimeter] or [Inch].
Other standard sizes
Sets special standard sizes.
1. Press [Others Standard] and then [Select size].
2. Select the paper size.
3. Press [Close].
Input size
Sets the required paper size.
1. Press [Input size].
2. Specify the vertical size using the [+] or [-] key.
Metric specifications only
Enter the size directly using the numeric keys by
pressing [#-Keys].
Setting range
Inch specifications: 3
7/8
" to 11
5/8
" (in 1/8" incre-
ments)
Metric specifications: 98 to 297 mm (in 1-mm incre-
ments)
3. Specify the horizontal size using the [+] or [-] key.
Metric specifications only
Enter the size directly using the numeric keys by
pressing [#-Keys].
Setting range
Inch specifications: 5
7/8
" to 17" (in 1/8" incre-
ments)
Metric specifications: 148 to 432 mm (in 1-mm
increments)
Service Manual Y104350-7